hp LJ 2300 error 52.00 after different cartridge
更新时间：2024/3/29 19:50:44,view:446hp打印机HP LJ 2300 error 52.00 after different cartridge苏州hp独墅湖打印机售后服务中心电话0512-696l6769，苏州hpHP LJ 2300 error 52.00 after different cartridge独墅湖维修站，hpHP LJ 2300 error 52.00 after different cartridge独墅湖维修站,hpHP LJ 2300 error 52.00 after different cartridge维修手册，hpHP LJ 2300 error 52.00 after different cartridge驱动程序下载，hpHP LJ 2300 error 52.00 after different cartridge说明书，hpHP LJ 2300 error 52.00 after different cartridge故障代码在线技术交流，有问必答,hpHP LJ 2300 error 52.00 after different cartridge卡纸，打印浅，亮红灯，不通电，无法使用等故障自己查询维修资料即可解决问题
Probably this was not a good idea, but ... maybe you can help out.
I tried to figure out why i get this toner dirt (horizontal) on the paper.
In the process of figuring this out I tried a toner from a LJ2100 (after breaking the notch).
First the printer accepted it and gave the non-hp catridge detected (because of the missing chips). Then when i try to print it gave a 52.00 error.
After that the original toner still worked.
However after some while the printer gave the 52.00 error again.
When I now put in the LJ2100 catridge it does not accept it and gives a 10.00.00 SUPPLIES MEMORY ERROR instead of non-hp catridge error.
Can this be only the original toner being defect? or is it also the ECU board that I see mentioned in another topic.
Can inserting a LJ2100 toner give this problem?
The 52.00 error seems to be scanner related, but this is not what I think.
Now I think the toner dirth is caused by the toner. But I don't think that I only need a new toner ;-)
hp常见故障问题解答 2010-3-9 22:26:35
In your case since you put in the wrong cartridge it has something to do with the shutter tab on the cartridge. In other words when you insert the cartridge it has a tab which moves the shutter away from the laser/scanner and I guess it is possible that you may have dislodge you actual shutter mech on the printer. Only way to tell is by removing the top cover and checking the movement as you insert the toner.
hp常见故障问题解答 2010-3-9 22:26:35
In your case since you put in the wrong cartridge it has something to do with the shutter tab on the cartridge. In other words when you insert the cartridge it has a tab which moves the shutter away from the laser/scanner and I guess it is possible that you may have dislodge you actual shutter mech on the printer. Only way to tell is by removing the top cover and checking the movement as you insert the toner.
I tried to figure out why i get this toner dirt (horizontal) on the paper.
In the process of figuring this out I tried a toner from a LJ2100 (after breaking the notch).
First the printer accepted it and gave the non-hp catridge detected (because of the missing chips). Then when i try to print it gave a 52.00 error.
After that the original toner still worked.
However after some while the printer gave the 52.00 error again.
When I now put in the LJ2100 catridge it does not accept it and gives a 10.00.00 SUPPLIES MEMORY ERROR instead of non-hp catridge error.
Can this be only the original toner being defect? or is it also the ECU board that I see mentioned in another topic.
Can inserting a LJ2100 toner give this problem?
The 52.00 error seems to be scanner related, but this is not what I think.
Now I think the toner dirth is caused by the toner. But I don't think that I only need a new toner ;-)
hp常见故障问题解答 2010-3-9 22:26:35 In your case since you put in the wrong cartridge it has something to do with the shutter tab on the cartridge. In other words when you insert the cartridge it has a tab which moves the shutter away from the laser/scanner and I guess it is possible that you may have dislodge you actual shutter mech on the printer. Only way to tell is by removing the top cover and checking the movement as you insert the toner.
hp常见故障问题解答 2010-3-9 22:26:35 In your case since you put in the wrong cartridge it has something to do with the shutter tab on the cartridge. In other words when you insert the cartridge it has a tab which moves the shutter away from the laser/scanner and I guess it is possible that you may have dislodge you actual shutter mech on the printer. Only way to tell is by removing the top cover and checking the movement as you insert the toner.
苏州hp售后维修站 互动 2010-3-9 22:26:35 In your case since you put in the wrong cartridge it has something to do with the shutter tab on the cartridge. In other words when you insert the cartridge it has a tab which moves the shutter away from the laser/scanner and I guess it is possible that you may have dislodge you actual shutter mech on the printer. Only way to tell is by removing the top cover and checking the movement as you insert the toner.
热门图文