Kept getting a "Unable to Print see Maintainace and Troubleshooting Guide" message.Only thing to do was clean the platen(?). Not the easiest part to find. They should make it another color... Finally called Brother...Went through the "key in blah,blah, and blah" bit. LCD Flashed error code 4F. Guy on the helpline didn't know what it meant(!!). Gave me an area repair shop. I'd like to know the code meaning so I can(if need be)make sure that the shop doesn't try to rip me off(repair est./self-repair instruc. would be nice from here, too). Thanks!
常见故障问题解答  2010-5-24 14:43:38 
 Access the internal maintenance mode by pressing the Menu/Set button, then press * 2 8 6 4 within 2 seconds. This should put you in the maintenance mode menu. Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.

This will reset the purge count value. Then the printer will restart, hopefully without the annoying cannot clean message.

You'd be surprised how this fixes inoperable MFC210c's--TRY THIS FIRST!

苏州售后维修站 互动  2010-5-24 14:43:38 
 Access the internal maintenance mode by pressing the Menu/Set button, then press * 2 8 6 4 within 2 seconds. This should put you in the maintenance mode menu. Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.

This will reset the purge count value. Then the printer will restart, hopefully without the annoying cannot clean message.

You'd be surprised how this fixes inoperable MFC210c's--TRY THIS FIRST!

热门图文

相关资料补充