how can i reset the counter for a samsung scx 4623f printer ?
更新时间:2024/3/19 7:32:03,view:411how can i reset the counter for a samsung scx 4623f printer ?打印机苏州常熟一体机维修点电话0512-696l6769,苏州how can i reset the counter for a samsung scx 4623f printer ?常熟维修站,how can i reset the counter for a samsung scx 4623f printer ?常熟维修站,how can i reset the counter for a samsung scx 4623f printer ?维修手册,how can i reset the counter for a samsung scx 4623f printer ?驱动程序下载,how can i reset the counter for a samsung scx 4623f printer ?说明书,how can i reset the counter for a samsung scx 4623f printer ?故障代码在线技术交流,有问必答,how can i reset the counter for a samsung scx 4623f printer ?卡纸,打印浅,亮红灯,不通电,无法使用等故障自己查询维修资料即可解决问题
常见故障问题解答 2010-7-9 21:44:13
Shut off the printer.
Front door opened
Hold down the "Continue" button while opening the front door. Then turn on the printer.
Error LED lit
Keep the Continue button held down until only the "Error LED" is on then release the button. Close the door.
Top 3 LEDs lit.
The Continue button, Ready/Data, Toner Low, and Load Paper LEDs should all be lit upp.
Toner low LED lit.
Press "Cancel" a few times to cycle through the LEDs until just the "Toner Low LED" is lit.
Press and hold the "Continue" button until the LEDs cycle through and release only when the LED stops at Toner Low.
Turn the printer off and back on.
常见故障问题解答 2010-7-9 21:44:13
Shut off the printer.
Front door opened
Hold down the "Continue" button while opening the front door. Then turn on the printer.
Error LED lit
Keep the Continue button held down until only the "Error LED" is on then release the button. Close the door.
Top 3 LEDs lit.
The Continue button, Ready/Data, Toner Low, and Load Paper LEDs should all be lit upp.
Toner low LED lit.
Press "Cancel" a few times to cycle through the LEDs until just the "Toner Low LED" is lit.
Press and hold the "Continue" button until the LEDs cycle through and release only when the LED stops at Toner Low.
Turn the printer off and back on.
苏州售后维修站 互动 2010-7-9 21:44:13
Shut off the printer.
Front door opened
Hold down the "Continue" button while opening the front door. Then turn on the printer.
Error LED lit
Keep the Continue button held down until only the "Error LED" is on then release the button. Close the door.
Top 3 LEDs lit.
The Continue button, Ready/Data, Toner Low, and Load Paper LEDs should all be lit upp.
Toner low LED lit.
Press "Cancel" a few times to cycle through the LEDs until just the "Toner Low LED" is lit.
Press and hold the "Continue" button until the LEDs cycle through and release only when the LED stops at Toner Low.
Turn the printer off and back on.
热门图文