canonIp100eror6a00
更新时间:2024/3/16 21:50:49,view:391canon打印机canon Ip100 eror 6a00苏州canon复印机服务中心电话0512-696l6769,苏州canoncanon Ip100 eror 6a00维修站,canoncanon Ip100 eror 6a00苏州维修站,canoncanon Ip100 eror 6a00维修手册,canoncanon Ip100 eror 6a00驱动程序下载,canoncanon Ip100 eror 6a00说明书,canoncanon Ip100 eror 6a00故障代码在线技术交流,有问必答,canoncanon Ip100 eror 6a00小故障自己查询维修资料即可解决问题
I GOOLED it and soon found I was not the only one having this problem. I read some fix-it stories and think I have a handle on the basic problem. The trouble is everyone else has bigger printers then me (600 and 800 and such) and they seem to come apart a little easier them my 100. I am reasonably good with my hands (or so my girl-friend says). I got the screws out of the casing and managed to pry it apart a little, but there must be some holding lugs that I can see as the case refuses to come away from the casing. I am a little handicapped as I don have many tools, but have managed to get this far with a tire iron, a hammer and a wire brush.
Is there anyone who has pulled a 100 apart and can help me do the same thing.
canon常见故障问题解答 2010-7-21 19:53:33
Check out the forum for: S530D 5C00 Error-Waste Ink? Below is my post after using those solutions. They worked!
You don't need to take the printer apart, only get the ink cartridges moved all the way to the left, then remove the ink pads on the right. CAREFULLY - use tweezers and don't drop them into the works.
I used these two year old solutions to fix my Canon Pixma ip100. After calling my local service and Best Buy, who both advised me it would probably cost more than $100 to have them fix it, I was told by my local print guy to check this site out (bless his heart - LOVE small town living.) I moved the ink carriages over manually - very carefully - while the unit was still completely unconnected (the carriages wouldn't move when it was on anyway) - popped up the two ink pads and using hair dye gloves so I didn't end up inked, pressed the pads between paper towels until no more ink released...then pressed paper towel all over the pad containers and area. Popped the pads back in, attached the cords, plugged it in, connected it to the laptop, then turned on the unit..ran maintenance (aligning and cleaning) and she's working just fine now. For now. Text is printing cleanly and photos are printing nicely. Maybe a touch less sharpness than before, but good enough for government work! Sure beats a new printer - thank you all so very much for sharing.
canon常见故障问题解答 2015-8-19 23:30:40
清洁单元问题
佳能常见故障问题解答 2010-7-21 19:53:33
Check out the forum for: S530D 5C00 Error-Waste Ink? Below is my post after using those solutions. They worked!
You don't need to take the printer apart, only get the ink cartridges moved all the way to the left, then remove the ink pads on the right. CAREFULLY - use tweezers and don't drop them into the works.
I used these two year old solutions to fix my Canon Pixma ip100. After calling my local service and Best Buy, who both advised me it would probably cost more than $100 to have them fix it, I was told by my local print guy to check this site out (bless his heart - LOVE small town living.) I moved the ink carriages over manually - very carefully - while the unit was still completely unconnected (the carriages wouldn't move when it was on anyway) - popped up the two ink pads and using hair dye gloves so I didn't end up inked, pressed the pads between paper towels until no more ink released...then pressed paper towel all over the pad containers and area. Popped the pads back in, attached the cords, plugged it in, connected it to the laptop, then turned on the unit..ran maintenance (aligning and cleaning) and she's working just fine now. For now. Text is printing cleanly and photos are printing nicely. Maybe a touch less sharpness than before, but good enough for government work! Sure beats a new printer - thank you all so very much for sharing.
佳能常见故障问题解答 2015-8-19 23:30:40
清洁单元问题
苏州canon售后维修站 互动 2010-7-21 19:53:33
Check out the forum for: S530D 5C00 Error-Waste Ink? Below is my post after using those solutions. They worked!
You don't need to take the printer apart, only get the ink cartridges moved all the way to the left, then remove the ink pads on the right. CAREFULLY - use tweezers and don't drop them into the works.
I used these two year old solutions to fix my Canon Pixma ip100. After calling my local service and Best Buy, who both advised me it would probably cost more than $100 to have them fix it, I was told by my local print guy to check this site out (bless his heart - LOVE small town living.) I moved the ink carriages over manually - very carefully - while the unit was still completely unconnected (the carriages wouldn't move when it was on anyway) - popped up the two ink pads and using hair dye gloves so I didn't end up inked, pressed the pads between paper towels until no more ink released...then pressed paper towel all over the pad containers and area. Popped the pads back in, attached the cords, plugged it in, connected it to the laptop, then turned on the unit..ran maintenance (aligning and cleaning) and she's working just fine now. For now. Text is printing cleanly and photos are printing nicely. Maybe a touch less sharpness than before, but good enough for government work! Sure beats a new printer - thank you all so very much for sharing.
苏州canon售后维修站 互动 2015-8-19 23:30:40
清洁单元问题
热门图文