Broken hp LaserJet 4250 !
更新时间：2024/4/16 7:10:27,view:644hp打印机Broken HP LaserJet 4250 !苏州hp打印机售后维修服务中心电话0512-696l6769，苏州维修点电话, hp5225如何打印自检, hp1005打印测试页, HP2055怎么打印自检, HP227打印双面第一张卡纸, HP5200高压板在哪,
加松下的粉试试(I have written somewhere on the forum before I think, but I get error messages while trying to post there?
My printer hp LaserJet 4250 is broken.
1. The paper is jamming just behind Tray 1 manual feeding area.
2. The laserink don抰 fits/pastes on the paper. It is just like powder while touching the laserink on the paper.
3. A very loud noise is coming from the backside of the printer.
If i open the hatch on the back the paper wont come out that way anyway.
This is the errorlog:
50 119831 13.05.00 FUSER OUTPUT, PAPER LATE JAM
49 119833 13.05.00 FUSER OUTPUT, PAPER LATE JAM
48 119832 13.05.00 FUSER OUTPUT, PAPER LATE JAM
47 119831 13.05.00 FUSER OUTPUT, PAPER LATE JAM
46 119833 13.05.00 FUSER OUTPUT, PAPER LATE JAM
45 119832 13.05.00 FUSER OUTPUT, PAPER LATE JAM
44 119831 13.05.00 FUSER OUTPUT, PAPER LATE JAM
43 119838 13.02.00 PAPER FEED 1, PAPER STOPPED JAM
42 119837 13.05.00 FUSER OUTPUT, PAPER LATE JAM
41 119837 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
40 119835 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
39 119833 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
38 119831 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
37 119829 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
36 119827 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
How to fix it exactly and what exactly is wrong? Have all errors the same origin?
常见故障问题解答 2010-9-23 21:29:16
Remove the back door. You open it and push on the left bottom part until it pops out. Then there are 2 blue latches on the fuser. Squeeze them and pull it out. Look in the printer on the left side. If you see a pile of gray dust, that's the drive gear teeth.
My printer hp LaserJet 4250 is broken.
1. The paper is jamming just behind Tray 1 manual feeding area.
2. The laserink don抰 fits/pastes on the paper. It is just like powder while touching the laserink on the paper.
3. A very loud noise is coming from the backside of the printer.
If i open the hatch on the back the paper wont come out that way anyway.
This is the errorlog:
50 119831 13.05.00 FUSER OUTPUT, PAPER LATE JAM
49 119833 13.05.00 FUSER OUTPUT, PAPER LATE JAM
48 119832 13.05.00 FUSER OUTPUT, PAPER LATE JAM
47 119831 13.05.00 FUSER OUTPUT, PAPER LATE JAM
46 119833 13.05.00 FUSER OUTPUT, PAPER LATE JAM
45 119832 13.05.00 FUSER OUTPUT, PAPER LATE JAM
44 119831 13.05.00 FUSER OUTPUT, PAPER LATE JAM
43 119838 13.02.00 PAPER FEED 1, PAPER STOPPED JAM
42 119837 13.05.00 FUSER OUTPUT, PAPER LATE JAM
41 119837 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
40 119835 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
39 119833 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
38 119831 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
37 119829 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
36 119827 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
How to fix it exactly and what exactly is wrong? Have all errors the same origin?
常见故障问题解答 2010-9-23 21:29:16 Remove the back door. You open it and push on the left bottom part until it pops out. Then there are 2 blue latches on the fuser. Squeeze them and pull it out. Look in the printer on the left side. If you see a pile of gray dust, that's the drive gear teeth.
热门图文