韩刷盾 2018/6/24 21:02:24 The previous post is correct except when you try to take out the transfer belt cleaner. The blue handle should be left in the horizontal position and the belt cleaning blade should then be removed. Then take out the locking screw and move the handle to the vertical position for transfer belt removal. This also entails removing a screw on the front side pivot point of the duplex unit door. Once the screw is removed the duplex unit door can be moved to the slightly to the right which will allow it to be parked in a completely horizontal position. At this point the belt assy has one connector to unplug. Then the belt can be slid out of the copier. Again make sure the belt cleaning blade is removed FIRST. Also there is usually a screw that has to be removed to remove the belt cleaning blade tube assy.
天枢 2018/6/20 14:16:08 东芝打印机5540C打印机提示CA00 问题出在哪里