理光sp201sf提示sc559
更新时间:2026/8/5 21:25:07,view:231苏州理光201打印机售后服务中心客服热线69616769,苏州理光打印机售后维修电话,理光打印机售后网点,理光201SF一体机出现556故障代码,SPSF报SC556怎么解决,SPSF维修呼叫SC556怎么处理,出现sc556代码,L出SC556,sf提示维修呼叫sc542,SF-S内存溢出怎么处理,SU用什么粉盒,sp提示没有墨,SF打印时提示未设置打印盒,sp打印机墨加墨粉口,打印机清零,只有fax无法打印,SP-SF提示维修呼叫SC542,如何消除代码,201维修视频2026/8/5
Code: SC559-00 (检测到定影单元卡纸次数超过3次)
Description:
Fusing Jam Detected for 3 Times Consecutively Fusing jam (does not reach fusing exit sensor) is detected for 3 times consecutively. Detection conditions Displays the SC559-00 at the time of integrating the counter each time fusing jam occurs, became fusing jam counter value = 3. The counter value is retained without fusing jam also reset by OFF/ON the power supply. Control ON/OFF And enables ON / OFF is this SC, the default is set to OFF, then ON at the time of customer requirements. SP1-142-001 0: OFF (default),
1: ON (Set at the time of customer requirements) Counter reset condition occurs fusing jam
1. Normal paper exit has been done during this continuous fusing jam, fusing jam counter is reset.
2. When "1" is changed to "0" SP1-142-001, to reset the (SP9-912-001) fusing jam counter.
3. When after displaying SC559, SC release is made, reset the (SP9912-001) fusing jam counter.
Causes:
Fusing unit paper jam
Remedy:
Remove the jam
理光sp201sf提示sc559
Description:
Fusing Jam Detected for 3 Times Consecutively Fusing jam (does not reach fusing exit sensor) is detected for 3 times consecutively. Detection conditions Displays the SC559-00 at the time of integrating the counter each time fusing jam occurs, became fusing jam counter value = 3. The counter value is retained without fusing jam also reset by OFF/ON the power supply. Control ON/OFF And enables ON / OFF is this SC, the default is set to OFF, then ON at the time of customer requirements. SP1-142-001 0: OFF (default),
1: ON (Set at the time of customer requirements) Counter reset condition occurs fusing jam
1. Normal paper exit has been done during this continuous fusing jam, fusing jam counter is reset.
2. When "1" is changed to "0" SP1-142-001, to reset the (SP9-912-001) fusing jam counter.
3. When after displaying SC559, SC release is made, reset the (SP9912-001) fusing jam counter.
Causes:
Fusing unit paper jam
Remedy:
Remove the jam
理光sp201sf提示sc559
热门图文