佳能C5051出现E000075-0103
更新时间：2025/3/14 15:02:23,view:684佳能打印机C5051苏州佳能打印机售后服务中心客服热线69616769，苏州佳能售后电话，佳能售后网点，
佳能C5051出现E000075-0103
佳能c5051苏州维修服务电话696l6769 曹汔菠 2018/9/2 15:23:48 The E000075 error code refers to the ITB belt shifting front to rear of the machine and can not compensate. There are two causes that will make this happen.
a) The machine that is not level
b) Uneven thickness of the ITB belt from front to rear.
To resolve this issue, first observe the ITB Position value of displacement in service mode under Copier > Display > Misc > ITB-POS. The range is between -300 to 450. If the value is very close to the high end or low end, perform the following:
a) Check to make sure that the machine is level.
b) After leveling the machine, run Copier > Function > MISC-P > ITB-INT in service mode
c) Check Copier > Display > MISC > ITB-POS again to make sure the value is approximately within the mid range
d) If the value in step c is not within mid range, remove the ITB belt and reverse it from front to rear and repeat the prior steps again.
用户 2019-10-14 佳能e000075-0103
佳能c5051苏州维修服务电话696l6769 曹汔菠 2018/9/2 15:23:48 The E000075 error code refers to the ITB belt shifting front to rear of the machine and can not compensate. There are two causes that will make this happen.a) The machine that is not level
b) Uneven thickness of the ITB belt from front to rear.
To resolve this issue, first observe the ITB Position value of displacement in service mode under Copier > Display > Misc > ITB-POS. The range is between -300 to 450. If the value is very close to the high end or low end, perform the following:
a) Check to make sure that the machine is level.
b) After leveling the machine, run Copier > Function > MISC-P > ITB-INT in service mode
c) Check Copier > Display > MISC > ITB-POS again to make sure the value is approximately within the mid range
d) If the value in step c is not within mid range, remove the ITB belt and reverse it from front to rear and repeat the prior steps again.
用户 2019-10-14 佳能e000075-0103
热门图文