010 397 IOT Fuser Failure 定影单元故障 富士施乐M215b故障代码010-397重启打印机 施乐m215 钱裟诜 2018/12/28 21:23:46 The 010-397 Fuser Error Message on these machines is a pretty generic error that can mean several different things. If you want a more precise message the press the down arrow, up arrow, and the OK button. If done correctly the machine will give you a better idea of how to troubleshoot the problem. Overheat errors, turn the machine off and let it sit 15 to 20 minutes then try again. Low temp errors, turn the machine off then back on. Sometimes low heat errors can be easily fixed, however if it does it more than once then check the power source or replace the fusing assembly. Other errors follow the troubleshooting steps below.