柯美751报C-3803代码怎么解决?
更新时间:2026/11/19 1:37:12,view:232苏州柯美751打印机售后服务中心客服热线69616769,苏州柯美打印机售后维修电话,柯美打印机售后网点,柯美751柯尼卡如何进入维修模式,出现检测到故障关闭并打开主开关,c352维修召唤c3,正反打有纸灰,一直显示预热,出c-3503怎么解决?,C-3503,出C-3503?,怎样清除代码,部件指示通过,打开安全关,复印机怎样进维修模式?,提示最大浓度传感器在打印时检测到纸张,751维修视频2026/11/19
苏州柯美751售后维修电话696l6769,维修
C3803 ERROR problem with the fusing unit. This is the assembly that gets hot and "fuses" the toner onto your paper. This error code means that the fusing unit did not warm up properly. You will need to have a service company come out to diagnose and repair the problem then reset this code as service mode entry is required in order to reset. It could be as simple as cleaning the thermistor, replacing the thermistor, thermal fuse etc. I would estimate the cost at around $200.00.
Here is the section from the service manual that deals with this code:
Thermistor /1 (TH1) detects a low
temperature when a specified
period of time elapses after the
fusing heater lamp is turned ON
for the fusing ON control.柯美751报C-3803代码怎么解决?
用户 零繁117.14.*.* 发表于 2023-7-31 C3803怎么解决
技术 王继迁 发表于 2023-7-31 C3803定影器坏了故障修复后进入维修模式清零处理
C3803 ERROR problem with the fusing unit. This is the assembly that gets hot and "fuses" the toner onto your paper. This error code means that the fusing unit did not warm up properly. You will need to have a service company come out to diagnose and repair the problem then reset this code as service mode entry is required in order to reset. It could be as simple as cleaning the thermistor, replacing the thermistor, thermal fuse etc. I would estimate the cost at around $200.00.
Here is the section from the service manual that deals with this code:
Thermistor /1 (TH1) detects a low
temperature when a specified
period of time elapses after the
fusing heater lamp is turned ON
for the fusing ON control.柯美751报C-3803代码怎么解决?
热门图文