柯尼卡美能达c360显示c2555
更新时间:2026/11/20 22:23:42,view:188苏州美能达360打印机售后服务中心客服热线69616769,苏州美能达打印机售后维修电话,美能达打印机售后网点,美能达360C故障代码C一2558,4400代码024-,更换鼓组件新品发布,复印机只能识别纸型,清了转印 打印淡,I电脑打印正常,用U盘打印就偏淡,CI 打印黑色定影不牢,tcr传感器,C故障码C2557,i打印底色发黄,C打印命令发送成功不出纸,机器不报错,打印列表显示停止打印,打印红色打印偏黄,柯尼卡C怎么进入,柯尼卡C彩色复印机打印现代码,C2555,定影出纸口卡纸,360维修视频2026/11/20
柯尼卡美能达c360显示c2555
技术 sijie2012 发表于 2022/3/14 美能达360Code C2555
Description Abnormally low toner density detected Yellow TCR Sensor
T/C 0.21 % , less is detected ten consecutive times in the Developing Unit as validated through the toner replenishing amount determination control.
Remedy
1 Perform image troubleshooting procedure if image density is low.
2 Clean the TCR Sensor window on the underside of the Imaging Unit if dirty
3 Correct the TCR Sensor spring moving part if faulty.
4 Clean the TCR Sensor LED if dirty.
5 Change TCR Sensor C/M/Y.
6 M3, M4 operation check PWB-MC PJ8MC-1 to 4 PWB-MC PJ8MC-5 to 8.
7 Change Imaging Unit.
8 Change PWB-MC.
9 Change PWB-MFPC.
手机用户139.21.*.* 发表于 2022-6-12 1690
Description Abnormally low toner density detected Yellow TCR Sensor
T/C 0.21 % , less is detected ten consecutive times in the Developing Unit as validated through the toner replenishing amount determination control.
Remedy
1 Perform image troubleshooting procedure if image density is low.
2 Clean the TCR Sensor window on the underside of the Imaging Unit if dirty
3 Correct the TCR Sensor spring moving part if faulty.
4 Clean the TCR Sensor LED if dirty.
5 Change TCR Sensor C/M/Y.
6 M3, M4 operation check PWB-MC PJ8MC-1 to 4 PWB-MC PJ8MC-5 to 8.
7 Change Imaging Unit.
8 Change PWB-MC.
9 Change PWB-MFPC.
热门图文