hp Color LaserJet CP1518常见故障代码描述,英文手册
更新时间：2026/10/12 12:54:37,view:152苏州hp1518打印机售后服务中心客服热线69616769，苏州hp打印机售后维修电话，hp打印机售后网点，hp1518打印机下面等不停地闪动,三灯闪不能打印,打印机感叹号常亮,需要清零吗,打印机故障灯闪烁,打印几张就cleaning,hdeskjet三个灯一直闪烁,打印机黄灯一直闪,打印机cpni橙色灯一闪一闪,Hp打印机X旁出现闪烁的黄灯,墨水灯和错误灯亮红灯并且闪烁,出现enginecommerror,deskjet红灯闪烁,驱动装上有黄色的三角,墨盒灯闪烁,1518维修视频2026/10/12
Code: -
Display:
in wrong position
Description:
A print cartridge is installed in the incorrect slot.
Remedy:
Ensure that each print cartridge is in the correct slot. From back to front, the print cartridges are installed in this order: yellow, magenta, cyan, black.
Code: -
Display:
Device error
Description:
An internal error occurred.
Remedy:
Press OK to resume the job.
Code: -
Display:
Front Door open
Description:
The product front door is open.
Remedy:
Close the door.
Code: -
Display:
Fuser Error
Description:
The product has experienced an error with the fuser.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. Turn off the product, wait at least 25 minutes, and then turn on the product. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 10.XXXX
Display:
10.XXXX Supply error
Description:
The e-label for one of the print cartridges cannot be read or is missing.
• 10.0000 = black e-label error • 10.0001 = cyan e-label error • 10.0002 = magenta e-label error • 10.0003 = yellow e-label error • 10.1000 = black e-label is missing • 10.1001 = cyan e-label is missing • 10.1002 = magenta e-label is missing • 10.1003 = yellow e-label is missing/¬?
Remedy:
Reinstall the print cartridge. Turn the product off, and then on. If the problem is not solved, replace the cartridge.
Code: 49
Display:
49 Error
Description:
The product experienced an internal error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 51.XX
Display:
51.XX Error
Description:
The product has experienced an internal hardware error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 54.XX
Display:
54.XX Error
Description:
The product has experienced an error with one of the internal sensors.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 55.X
Display:
55.X Error
Description:
The product has experienced an internal error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 59.X
Display:
59.X Error
Description:
The product has experienced a problem with one of the motors.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 79
Display:
79 Error
Description:
The product has experienced an internal firmware error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 79
Display:
79 Service error
Description:
An incompatible DIMM is installed.
Remedy:
1. Turn the product off. 2. Install a DIMM that the product supports. 3. Turn the product on.
Display:
Description:
A print cartridge is installed in the incorrect slot.
Remedy:
Ensure that each print cartridge is in the correct slot. From back to front, the print cartridges are installed in this order: yellow, magenta, cyan, black.
Code: -
Display:
Device error
Description:
An internal error occurred.
Remedy:
Press OK to resume the job.
Code: -
Display:
Front Door open
Description:
The product front door is open.
Remedy:
Close the door.
Code: -
Display:
Fuser Error
Description:
The product has experienced an error with the fuser.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. Turn off the product, wait at least 25 minutes, and then turn on the product. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 10.XXXX
Display:
10.XXXX Supply error
Description:
The e-label for one of the print cartridges cannot be read or is missing.
• 10.0000 = black e-label error • 10.0001 = cyan e-label error • 10.0002 = magenta e-label error • 10.0003 = yellow e-label error • 10.1000 = black e-label is missing • 10.1001 = cyan e-label is missing • 10.1002 = magenta e-label is missing • 10.1003 = yellow e-label is missing/¬?
Remedy:
Reinstall the print cartridge. Turn the product off, and then on. If the problem is not solved, replace the cartridge.
Code: 49
Display:
49 Error
Description:
The product experienced an internal error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 51.XX
Display:
51.XX Error
Description:
The product has experienced an internal hardware error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 54.XX
Display:
54.XX Error
Description:
The product has experienced an error with one of the internal sensors.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 55.X
Display:
55.X Error
Description:
The product has experienced an internal error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 59.X
Display:
59.X Error
Description:
The product has experienced a problem with one of the motors.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 79
Display:
79 Error
Description:
The product has experienced an internal firmware error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 79
Display:
79 Service error
Description:
An incompatible DIMM is installed.
Remedy:
1. Turn the product off. 2. Install a DIMM that the product supports. 3. Turn the product on.
热门图文