hp LaserJet Pro MFP M126nw常见故障代码描述,英文手册
更新时间：2025/11/13 11:12:09,view:94苏州hp126打印机售后服务中心客服热线69616769，苏州hp打印机售后维修电话，hp打印机售后网点，hp126Ma一体机,通电后报错闪动,MA显示闪烁不工作,ma显示E3,Ma左边2个显示灯闪烁,打印机驱动ma山角形灯在闪,ma故障e9,ma感叹号一直闪,a正在初始化,MA打印提示E3,ma电源键和感叹号亮起,m125打印机驱动下载,LJM125scan无法建立通信怎么办,M125设置默认邮箱,nw手机无线打印,粉盒按哪个键取下红色的,126维修视频2025/10/9
Code: 22
Display:
22 Scanner Error
Description:
The product has experienced an internal hardware error.
Remedy:
1. Check all of the FFC connections. 2. Verify that the scanner-carriage can move along the track in the scanner assembly, and that the scanner motor can rotate. 3. If the error persists, replace the FFC cable. 4. If the error persists, replace the scanner motor or the scanner carriage. 5. If the error persists, replace the formatter.
Code: 50.X
Display:
50.X Fuser Error
Description:
The product has experienced an internal hardware error.
Remedy:
1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Turn on the power and wait for the product to initialize. 4. If the error persists, replace the fuser.
Code: 52
Display:
52 Scanner Error
Description:
The product has experienced a scanner error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on. If the error persists, replace the scanner assembly.
hpM126不开机 手机用户112.11.*.* 2021-8-11 E7
hpM126进纸卡纸 韩矢 2021-8-12 开机报错E7问题 维修分享经验
机器送来时 开机正常，一打印就全闪，拆机发现是陶瓷品烧坏，更换后 开机显示E7，之前在网上查到说是扫描头问题，换过后问题依旧，重新梳理思路
Display:
22 Scanner Error
Description:
The product has experienced an internal hardware error.
Remedy:
1. Check all of the FFC connections. 2. Verify that the scanner-carriage can move along the track in the scanner assembly, and that the scanner motor can rotate. 3. If the error persists, replace the FFC cable. 4. If the error persists, replace the scanner motor or the scanner carriage. 5. If the error persists, replace the formatter.
Code: 50.X
Display:
50.X Fuser Error
Description:
The product has experienced an internal hardware error.
Remedy:
1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Turn on the power and wait for the product to initialize. 4. If the error persists, replace the fuser.
Code: 52
Display:
52 Scanner Error
Description:
The product has experienced a scanner error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on. If the error persists, replace the scanner assembly.
hpM126不开机 手机用户112.11.*.* 2021-8-11 E7 hpM126进纸卡纸 韩矢 2021-8-12 开机报错E7问题 维修分享经验机器送来时 开机正常，一打印就全闪，拆机发现是陶瓷品烧坏，更换后 开机显示E7，之前在网上查到说是扫描头问题，换过后问题依旧，重新梳理思路
热门图文