SharpMXM1054常见故障代码描述,英文手册2
苏州sharp维修站电话696l6769,维修点查询,售后服务,上门维修,技术服务,客户服务,维修手册,用户手册
Code: F0-10
Description:
Finisher staple motor section abnormality (FNM115)
The operation of the finisher staple is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the staple motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-11
Description:
Finisher bundle exit motor section abnormality (FNM116)
The grip expansion arm drive motor of the finisher for staple bundle exit is abnormal. hp sensor abnormality.
Causes:
Motor lock, motor harness short/open, control PWB trouble, hp sensor breakdown, disconnection of harness or connector.
Remedy:
Use SIM3-3 to check the operation of the gripper arm motor (FNM116). Check connection from the control PWB to the motor. Replace the control PWB and the sensor part.
Code: F0-14
Description:
Finisher paper rear edge falling motor section abnormality (FNM113)
The rear edge falling operation in the staple compiler of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the rear edge falling motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-15
Description:
Finisher tray lift motor section abnormality (FNM106)
The operation of the lift motor for the upper and the lower trays of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, area sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the upper tray lift motor and the lower tray lift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, and motor, and the sensor part.
Code: F0-18
Description:
Finisher rear edge hold motor section abnormality (FNM118)
The operation of the paper hold arm in the staple compiler of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the paper hold motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-19
Description:
Finisher paper alignment motor F section abnormality (FNM108)
The operation of the front alignment plate in the staple compiler of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the paper alignment motor F. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-20
Description:
Finisher paper alignment motor R section abnormality (FNM109)
The operation of the rear alignment plate in the staple compiler of the finisher.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the paper alignment motor R. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-23
Description:
Shutter trouble (FNCL102)
The operation of the shutter open/close in the paper exit section.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the shutter clutch. Check connection from the control PWB to the clutch and the sensor. Replace the control PWB, the clutch, and the sensor part.
Code: F0-25
Description:
Finisher paper transport roller lift motor section abnormality (FNM119)
The separation operation of the transport roller in the buffer section of the finisher or the path select operation of the flapper is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the paper transport roller lift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-28
Description:
Finisher paper alignment roller lift motor section abnormality (FNM112)
The lifting operation of the paper takeup roller arm in the staple compiler of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the paper alignment roller lift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-29
Description:
Finisher PWB cooling fan abnormality (FNFAN102)
The operation of the PWB cooling fan in the finisher is abnormal.
Causes:
Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy:
Use SIM3-3 to check the operation of the control PWB cooling fan. Check connection from the control PWB to the motor. Replace the control PWB and the fan motor.
Code: F0-30
Description:
Communication trouble between the finisher and the saddle
Communication trouble between the finisher and the saddle No response for the command send from the saddle unit
Causes:
Noise on the communication line, control PWB trouble, disconnection of connector or harness.
Remedy:
Turn OFF/ON the power. Check the connector between the finisher and the saddle. Replace the control PWB of the saddle unit.
Code: F0-31
Description:
Finisher saddle folding motor section abnormality (FNFAN103)
Saddle unit folding roller operation abnormality
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle paper folding motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-32
Description:
Finisher relay unit transport motor section abnormality (FNFAN104)
The operation of the paper transport in the paper relay unit of the finisher is abnormal.
Causes:
Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy:
Use SIM3-3 to check the operation of the relay paper transport motor. Check connection from the control PWB to the motor. Turn OFF/ON the power. Replace the control PWB and the motor.
Code: F0-33
Description:
Finisher punch shift motor section abnormality (FNM113)
The horizontal registration shift operation of the punch unit in the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the punch shift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-34
Description:
Finisher punch motor section abnormality (FNM117)
The punching operation of the punch unit in the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the punch motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-37
Description:
Finisher backup RAM trouble
Data cannot be written into the backup RAM. The red values are abnormal.
Causes:
Finisher control PWB trouble, EEPROM chip breakdown.
Remedy:
Replace the finisher control PWB.
Code: F0-40
Description:
Communication trouble between the finisher saddle and the trimmer
Communication trouble between the saddle unit and the trimmer unit. When a command is sent from the saddle unit to the trimmer unit, no response is made by the trimmer unit.
Causes:
Noise on the communication line, control PWB trouble, disconnection of connector or harness.
Remedy:
Turn OFF/ON the power. Check the connector between the saddle and the trimmer unit. Replace the control PWB of the saddle unit. Replace the control PWB of the trimmer unit.
Code: F0-41
Description:
Finisher saddle lead edge stopper motor section abnormality (FSM203)
The operation of the finisher saddle unit lead edge stopper motor is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle lead edge stopper motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-42
Description:
Finisher saddle folding roller guide motor section abnormality (FSM204)
The operation of the saddle unit folding roller guide is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle folding roller guide motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-43
Description:
Finisher saddle alignment motor section abnormality (FSM212)
The jogger shift operation in the staple compiler of the saddle unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle paper alignment motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-44
Description:
Finisher saddle rear edge hold motor section abnormality (FSM210)
The operation of the rear edge hold member of the saddle unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle rear edge hold motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-45
Description:
Finisher saddle staple motor section abnormality (FSM209)
The staple operation of the saddle unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle staple motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-46
Description:
Finisher saddle rear edge shift motor section abnormality (FSM211)
The operation of the rear edge shift motor of the finisher saddle unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle rear edge shift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-47
Description:
Finisher saddle flap motor section abnormality (FSM213)
The operation of the rear edge flap unit of the saddle unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle flap motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-48
Description:
Finisher saddle push motor section abnormality (FSM205)
The pushing operation of the saddle unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle push motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-49
Description:
Finisher saddle separation motor section abnormality (FSM214)
The operation of the takeup separation roller of the saddle unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle separation motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-51
Description:
Finisher trimmer cutter motor abnormality (FTM106)
The cutter operation of the trimmer unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the trimmer cutter motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-52
Description:
Finisher trimmer registration motor section abnormality (FTM102)
The operation of the registration taking unit of the trimmer unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the trimmer registration motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-53
Description:
Finisher trimmer inlet port separation motor abnormality (FTM103)
The separation operation of the inlet port roller of the trimmer unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the trimmer inlet port separation motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-54
Description:
Finisher trimmer paper exit separation motor section abnormality (FTM104)
The separation operation of the paper exit roller of the trimmer unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the trimmer paper exit separation motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-55
Description:
Finisher trimmer bundle press motor section abnormality (FTM105)
The nip and separation operations of the bundle press roller of the trimmer unit are abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the trimmer bundle press motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-56
Description:
Paper remaining trouble in the finisher trimmer
Paper bundle remained in the trimmer is not discharged by the automatic paper exit operation.
Causes:
Trimmer inlet port sensor breakdown The paper bundle is bent and cannot be transported
Remedy:
Use SIM3-3 to check the operation of the trimmer transport motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part. Check the paper bundle can be transported or not.
Code: F0-60
Description:
Communication trouble between the stacker first series and the downstream units.
Communication trouble with a downstream unit
Causes:
Communication trouble with the stacker and the downstream unit of the stacker Stacker unit ID setting failure (Setting failure of the DIP switch on the control PWB), noises on the communication line, control PWB trouble, connector connection failure, harness breakage, disconnection of an AC cable to a downstream unit
Remedy:
Turn OFF/ON the power. Check connection between the stacker and the downstream unit of the stacker. Replace the control PWB of the downstream unit of the stacker.
Code: F0-61
Description:
Stacker first series offset unit abnormality
Offset motor, offset home sensor abnormality
Causes:
Abnormal operation of the offset motor which shifts the stack tray paper exit roller Offset home sensor detection trouble Control PWB trouble, disconnection of connector trouble, motor trouble, sensor trouble
Remedy:
Use SIM03-61 to check the operation of the offset motor. Use SIM03-60 to check the offset home sensor signal. Replace the control PWB. Check connection of the connector and harness from the control PWB to the offset motor. Check connection of the connector and harness from the control PWB to the offset home sensor.
Code: F0-62
Description:
Stacker first series front side jogger abnormality
Front side jogger motor, front side jogger home sensor abnormality
Causes:
Abnormal operation of the front side jogger motor for driving the alignment plate (front side) Alignment plate (front side) home position front side jogger home sensor detection trouble Control PWB trouble, disconnection of connector trouble, motor trouble, sensor trouble
Remedy:
Use SIM03-61 to check the operation of the front side jogger motor. Use SIM03-60 to check the front side jogger home sensor signal. Replace the control PWB. Check connection of the connector and harness from the control PWB to the front side jogger motor. Check connection of the connector and harness from the control PWB to the front side jogger home sensor.
Code: F0-63
Description:
Stacker first series rear side jogger abnormality
Rear side jogger motor, rear side jogger home sensor abnormality
Causes:
Abnormal operation of the rear side jogger motor for driving the alignment plate (rear side) Alignment plate (rear side) home position rear side jogger home sensor detection trouble Control PWB trouble, disconnection of connector trouble, motor trouble, sensor trouble
Remedy:
Use SIM03-61 to check the operation of the rear side jogger motor. Use SIM03-60 to check the rear side jogger home sensor signal. Replace the control PWB. Check connection of the connector and harness from the control PWB to the rear side jogger motor. Check connection of the connector and harness from the control PWB to the rear side jogger home sensor.
Code: F0-64
Description:
Stacker first series lead edge jogger abnormality
Lead edge jogger motor, lead edge jogger home sensor abnormality
Causes:
Abnormal operation of the lead edge jogger motor for driving the alignment plate (lead edge) Alignment plate (lead edge) home position lead edge jogger home sensor detection trouble Control PWB trouble, disconnection of connector trouble, motor trouble, sensor trouble
Remedy:
Use SIM03-61 to check the operation of the lead edge jogger motor. Use SIM03-60 to check the lead edge jogger home sensor signal. Replace the control PWB. Check connection of the connector and harness from the control PWB to the lead edge jogger motor. Check connection of the connector and harness from the control PWB to the lead edge jogger home sensor.
Code: F0-65
Description:
Stacker first series stack tray abnormality
Stack tray lift motor abnormality, tray DC motor encoder sensor abnormality, tray limit switch (upper limit, lower limit) operation trouble, tray position sensor abnormality
Causes:
Abnormal operation of the stack tray lift motor Abnormality of the tray DC motor encoder sensor for detecting the motor rotation Tray limit switch (upper limit, lower limit) operation Stack tray home sensor abnormality, stack tray 25% load position sensor abnormality, stack tray 50% load position sensor abnormality, stack tray 75% load position sensor abnormality, stack tray 100% load position sensor abnormality, stack tray extendable position sensor abnormality Control PWB trouble, disconnection of connector trouble, motor trouble, sensor trouble
Remedy:
Use SIM03-61 to check the operation of the stack tray lift motor. Use SIM03-60 to check the tray DC motor encoder sensor signal. Use SIM03-60 to check the operation of the tray limit switch (upper limit, lower limit). Use SIM03-60 to check each tray position sensor signal and to check that two or more sensors are not simultaneously ON. Replace the control PWB. Check connection of the connector and harness from the control PWB to the stack tray lift motor. Check connection of the connector and harness from the control PWB to the tray DC motor encoder sensor. Check connection of the connector and harness from the control PWB to the tray limit switch (upper limit, lower limit). Check connection of the connector and harness from the control PWB to each tray position sensor.
Code: F0-70
Description:
Communication trouble between the finisher and the folding unit
Communication trouble between the finisher and the folding unit. No response for a command from the folding unit.
Causes:
Noise on the communication line, control PWB trouble, disconnection of connector or harness.
Remedy:
Turn OFF/ON the power. Check connection between the finisher and the folding unit. Replace the control PWB of the folding unit.
Code: F0-71
Description:
Folding unit lead edge holding guide motor section abnormality (FLM10)
The operations of the folding unit lead edge holding guide is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the folding unit lead edge holding guide motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-72
Description:
Folding unit backup RAM trouble
Data cannot be written into the backup RAM of the folding unit. The red values are abnormal.
Causes:
Folding unit control PWB trouble, EEPROM chip breakdown.
Remedy:
Replace the folding unit control PWB.
Code: F0-73
Description:
Folding unit power fan abnormality
Cooling fan abnormality in the power unit section of the folding unit
Causes:
Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy:
Check connection from the control PWB to the fan motor. Replace the control PWB. Replace the fan motor.
Code: F0-74
Description:
Folding unit folding tray paper exit motor section abnormality (FLM14)
The paper exit operation to the folding unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the folding unit folding tray paper exit motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-75
Description:
Folding unit upper stopper motor section abnormality (FLM8)
The operation of the upper stopper of the folding unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the folding unit upper stopper motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-76
Description:
3-fold stopper motor section in the folding unit is abnormal (FLM9)
The operation of the 3-fold stopper in the folding unit is abnormal
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-41 to check the operation of the 3-fold stopper motor in the folding unit. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-77
Description:
Folding unit transport motor section abnormality (FLM11)
The folding and transport operations of the folding unit are abnormal
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector.
Remedy:
Use SIM3-41 to check the operation of the folding unit transport motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor.
Code: F0-80
Description:
Finisher power cooling fan motor abnormality (FNFAN101)
The operation of the cooling fan in the power unit section of the finisher is abnormal.
Causes:
Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy:
Check connection from the control PWB to the fan motor. Replace the control PWB. Replace the fan motor.
Code: F0-81
Description:
Finisher upper tray fan abnormality (FNFAN103)
The operation of the cooling fan in the upper tray of the finisher is abnormal.
Causes:
Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy:
Use SIM3-3 to check the operation of the upper tray fan. Check connection from the control PWB to the fan motor. Replace the control PWB. Replace the fan motor.
Code: F0-82
Description:
Finisher lower tray fan abnormality (FNFAN104)
The operation of the cooling fan in the lower tray of the finisher is abnormal.
Causes:
Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy:
Use SIM3-3 to check the operation of the lower tray fan. Check connection from the control PWB to the fan motor. Replace the control PWB. Replace the fan motor.
Code: F0-83
Description:
Finisher paper guide motor section abnormality (FNM120)
The operation of the paper lead edge guide unit at the paper exit port of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the paper guide motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-84
Description:
Finisher grip section abnormality (FNM116)
The bundle grip operation when discharging paper bundle from the staple compiler of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the gripper motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-86
Description:
Finisher discharged paper hold motor section abnormality (FNM118)
The operation of the paper hold lever at the paper exit port of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the discharged paper hold motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-90
Description:
Communication trouble between the stacker second series and the downstream units.
Communication trouble with a downstream unit
Causes:
Communication trouble with the stacker and the downstream unit of the stacker Stacker unit ID setting failure (Setting failure of the DIP switch on the control PWB), noises on the communication line, control PWB trouble, connector connection failure, harness breakage, disconnection of an AC cable to a downstream unit
Remedy:
Turn OFF/ON the power. Check connection between the stacker and the downstream unit of the stacker. Replace the control PWB of the downstream unit of the stacker.
Description:
Finisher staple motor section abnormality (FNM115)
The operation of the finisher staple is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the staple motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-11
Description:
Finisher bundle exit motor section abnormality (FNM116)
The grip expansion arm drive motor of the finisher for staple bundle exit is abnormal. hp sensor abnormality.
Causes:
Motor lock, motor harness short/open, control PWB trouble, hp sensor breakdown, disconnection of harness or connector.
Remedy:
Use SIM3-3 to check the operation of the gripper arm motor (FNM116). Check connection from the control PWB to the motor. Replace the control PWB and the sensor part.
Code: F0-14
Description:
Finisher paper rear edge falling motor section abnormality (FNM113)
The rear edge falling operation in the staple compiler of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the rear edge falling motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-15
Description:
Finisher tray lift motor section abnormality (FNM106)
The operation of the lift motor for the upper and the lower trays of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, area sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the upper tray lift motor and the lower tray lift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, and motor, and the sensor part.
Code: F0-18
Description:
Finisher rear edge hold motor section abnormality (FNM118)
The operation of the paper hold arm in the staple compiler of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the paper hold motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-19
Description:
Finisher paper alignment motor F section abnormality (FNM108)
The operation of the front alignment plate in the staple compiler of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the paper alignment motor F. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-20
Description:
Finisher paper alignment motor R section abnormality (FNM109)
The operation of the rear alignment plate in the staple compiler of the finisher.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the paper alignment motor R. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-23
Description:
Shutter trouble (FNCL102)
The operation of the shutter open/close in the paper exit section.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the shutter clutch. Check connection from the control PWB to the clutch and the sensor. Replace the control PWB, the clutch, and the sensor part.
Code: F0-25
Description:
Finisher paper transport roller lift motor section abnormality (FNM119)
The separation operation of the transport roller in the buffer section of the finisher or the path select operation of the flapper is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the paper transport roller lift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-28
Description:
Finisher paper alignment roller lift motor section abnormality (FNM112)
The lifting operation of the paper takeup roller arm in the staple compiler of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the paper alignment roller lift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-29
Description:
Finisher PWB cooling fan abnormality (FNFAN102)
The operation of the PWB cooling fan in the finisher is abnormal.
Causes:
Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy:
Use SIM3-3 to check the operation of the control PWB cooling fan. Check connection from the control PWB to the motor. Replace the control PWB and the fan motor.
Code: F0-30
Description:
Communication trouble between the finisher and the saddle
Communication trouble between the finisher and the saddle No response for the command send from the saddle unit
Causes:
Noise on the communication line, control PWB trouble, disconnection of connector or harness.
Remedy:
Turn OFF/ON the power. Check the connector between the finisher and the saddle. Replace the control PWB of the saddle unit.
Code: F0-31
Description:
Finisher saddle folding motor section abnormality (FNFAN103)
Saddle unit folding roller operation abnormality
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle paper folding motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-32
Description:
Finisher relay unit transport motor section abnormality (FNFAN104)
The operation of the paper transport in the paper relay unit of the finisher is abnormal.
Causes:
Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy:
Use SIM3-3 to check the operation of the relay paper transport motor. Check connection from the control PWB to the motor. Turn OFF/ON the power. Replace the control PWB and the motor.
Code: F0-33
Description:
Finisher punch shift motor section abnormality (FNM113)
The horizontal registration shift operation of the punch unit in the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the punch shift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-34
Description:
Finisher punch motor section abnormality (FNM117)
The punching operation of the punch unit in the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the punch motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-37
Description:
Finisher backup RAM trouble
Data cannot be written into the backup RAM. The red values are abnormal.
Causes:
Finisher control PWB trouble, EEPROM chip breakdown.
Remedy:
Replace the finisher control PWB.
Code: F0-40
Description:
Communication trouble between the finisher saddle and the trimmer
Communication trouble between the saddle unit and the trimmer unit. When a command is sent from the saddle unit to the trimmer unit, no response is made by the trimmer unit.
Causes:
Noise on the communication line, control PWB trouble, disconnection of connector or harness.
Remedy:
Turn OFF/ON the power. Check the connector between the saddle and the trimmer unit. Replace the control PWB of the saddle unit. Replace the control PWB of the trimmer unit.
Code: F0-41
Description:
Finisher saddle lead edge stopper motor section abnormality (FSM203)
The operation of the finisher saddle unit lead edge stopper motor is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle lead edge stopper motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-42
Description:
Finisher saddle folding roller guide motor section abnormality (FSM204)
The operation of the saddle unit folding roller guide is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle folding roller guide motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-43
Description:
Finisher saddle alignment motor section abnormality (FSM212)
The jogger shift operation in the staple compiler of the saddle unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle paper alignment motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-44
Description:
Finisher saddle rear edge hold motor section abnormality (FSM210)
The operation of the rear edge hold member of the saddle unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle rear edge hold motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-45
Description:
Finisher saddle staple motor section abnormality (FSM209)
The staple operation of the saddle unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle staple motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-46
Description:
Finisher saddle rear edge shift motor section abnormality (FSM211)
The operation of the rear edge shift motor of the finisher saddle unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle rear edge shift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-47
Description:
Finisher saddle flap motor section abnormality (FSM213)
The operation of the rear edge flap unit of the saddle unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle flap motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-48
Description:
Finisher saddle push motor section abnormality (FSM205)
The pushing operation of the saddle unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle push motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-49
Description:
Finisher saddle separation motor section abnormality (FSM214)
The operation of the takeup separation roller of the saddle unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the saddle separation motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-51
Description:
Finisher trimmer cutter motor abnormality (FTM106)
The cutter operation of the trimmer unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the trimmer cutter motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-52
Description:
Finisher trimmer registration motor section abnormality (FTM102)
The operation of the registration taking unit of the trimmer unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the trimmer registration motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-53
Description:
Finisher trimmer inlet port separation motor abnormality (FTM103)
The separation operation of the inlet port roller of the trimmer unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the trimmer inlet port separation motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-54
Description:
Finisher trimmer paper exit separation motor section abnormality (FTM104)
The separation operation of the paper exit roller of the trimmer unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the trimmer paper exit separation motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-55
Description:
Finisher trimmer bundle press motor section abnormality (FTM105)
The nip and separation operations of the bundle press roller of the trimmer unit are abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the trimmer bundle press motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-56
Description:
Paper remaining trouble in the finisher trimmer
Paper bundle remained in the trimmer is not discharged by the automatic paper exit operation.
Causes:
Trimmer inlet port sensor breakdown The paper bundle is bent and cannot be transported
Remedy:
Use SIM3-3 to check the operation of the trimmer transport motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part. Check the paper bundle can be transported or not.
Code: F0-60
Description:
Communication trouble between the stacker first series and the downstream units.
Communication trouble with a downstream unit
Causes:
Communication trouble with the stacker and the downstream unit of the stacker Stacker unit ID setting failure (Setting failure of the DIP switch on the control PWB), noises on the communication line, control PWB trouble, connector connection failure, harness breakage, disconnection of an AC cable to a downstream unit
Remedy:
Turn OFF/ON the power. Check connection between the stacker and the downstream unit of the stacker. Replace the control PWB of the downstream unit of the stacker.
Code: F0-61
Description:
Stacker first series offset unit abnormality
Offset motor, offset home sensor abnormality
Causes:
Abnormal operation of the offset motor which shifts the stack tray paper exit roller Offset home sensor detection trouble Control PWB trouble, disconnection of connector trouble, motor trouble, sensor trouble
Remedy:
Use SIM03-61 to check the operation of the offset motor. Use SIM03-60 to check the offset home sensor signal. Replace the control PWB. Check connection of the connector and harness from the control PWB to the offset motor. Check connection of the connector and harness from the control PWB to the offset home sensor.
Code: F0-62
Description:
Stacker first series front side jogger abnormality
Front side jogger motor, front side jogger home sensor abnormality
Causes:
Abnormal operation of the front side jogger motor for driving the alignment plate (front side) Alignment plate (front side) home position front side jogger home sensor detection trouble Control PWB trouble, disconnection of connector trouble, motor trouble, sensor trouble
Remedy:
Use SIM03-61 to check the operation of the front side jogger motor. Use SIM03-60 to check the front side jogger home sensor signal. Replace the control PWB. Check connection of the connector and harness from the control PWB to the front side jogger motor. Check connection of the connector and harness from the control PWB to the front side jogger home sensor.
Code: F0-63
Description:
Stacker first series rear side jogger abnormality
Rear side jogger motor, rear side jogger home sensor abnormality
Causes:
Abnormal operation of the rear side jogger motor for driving the alignment plate (rear side) Alignment plate (rear side) home position rear side jogger home sensor detection trouble Control PWB trouble, disconnection of connector trouble, motor trouble, sensor trouble
Remedy:
Use SIM03-61 to check the operation of the rear side jogger motor. Use SIM03-60 to check the rear side jogger home sensor signal. Replace the control PWB. Check connection of the connector and harness from the control PWB to the rear side jogger motor. Check connection of the connector and harness from the control PWB to the rear side jogger home sensor.
Code: F0-64
Description:
Stacker first series lead edge jogger abnormality
Lead edge jogger motor, lead edge jogger home sensor abnormality
Causes:
Abnormal operation of the lead edge jogger motor for driving the alignment plate (lead edge) Alignment plate (lead edge) home position lead edge jogger home sensor detection trouble Control PWB trouble, disconnection of connector trouble, motor trouble, sensor trouble
Remedy:
Use SIM03-61 to check the operation of the lead edge jogger motor. Use SIM03-60 to check the lead edge jogger home sensor signal. Replace the control PWB. Check connection of the connector and harness from the control PWB to the lead edge jogger motor. Check connection of the connector and harness from the control PWB to the lead edge jogger home sensor.
Code: F0-65
Description:
Stacker first series stack tray abnormality
Stack tray lift motor abnormality, tray DC motor encoder sensor abnormality, tray limit switch (upper limit, lower limit) operation trouble, tray position sensor abnormality
Causes:
Abnormal operation of the stack tray lift motor Abnormality of the tray DC motor encoder sensor for detecting the motor rotation Tray limit switch (upper limit, lower limit) operation Stack tray home sensor abnormality, stack tray 25% load position sensor abnormality, stack tray 50% load position sensor abnormality, stack tray 75% load position sensor abnormality, stack tray 100% load position sensor abnormality, stack tray extendable position sensor abnormality Control PWB trouble, disconnection of connector trouble, motor trouble, sensor trouble
Remedy:
Use SIM03-61 to check the operation of the stack tray lift motor. Use SIM03-60 to check the tray DC motor encoder sensor signal. Use SIM03-60 to check the operation of the tray limit switch (upper limit, lower limit). Use SIM03-60 to check each tray position sensor signal and to check that two or more sensors are not simultaneously ON. Replace the control PWB. Check connection of the connector and harness from the control PWB to the stack tray lift motor. Check connection of the connector and harness from the control PWB to the tray DC motor encoder sensor. Check connection of the connector and harness from the control PWB to the tray limit switch (upper limit, lower limit). Check connection of the connector and harness from the control PWB to each tray position sensor.
Code: F0-70
Description:
Communication trouble between the finisher and the folding unit
Communication trouble between the finisher and the folding unit. No response for a command from the folding unit.
Causes:
Noise on the communication line, control PWB trouble, disconnection of connector or harness.
Remedy:
Turn OFF/ON the power. Check connection between the finisher and the folding unit. Replace the control PWB of the folding unit.
Code: F0-71
Description:
Folding unit lead edge holding guide motor section abnormality (FLM10)
The operations of the folding unit lead edge holding guide is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the folding unit lead edge holding guide motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-72
Description:
Folding unit backup RAM trouble
Data cannot be written into the backup RAM of the folding unit. The red values are abnormal.
Causes:
Folding unit control PWB trouble, EEPROM chip breakdown.
Remedy:
Replace the folding unit control PWB.
Code: F0-73
Description:
Folding unit power fan abnormality
Cooling fan abnormality in the power unit section of the folding unit
Causes:
Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy:
Check connection from the control PWB to the fan motor. Replace the control PWB. Replace the fan motor.
Code: F0-74
Description:
Folding unit folding tray paper exit motor section abnormality (FLM14)
The paper exit operation to the folding unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the folding unit folding tray paper exit motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-75
Description:
Folding unit upper stopper motor section abnormality (FLM8)
The operation of the upper stopper of the folding unit is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the folding unit upper stopper motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-76
Description:
3-fold stopper motor section in the folding unit is abnormal (FLM9)
The operation of the 3-fold stopper in the folding unit is abnormal
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-41 to check the operation of the 3-fold stopper motor in the folding unit. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-77
Description:
Folding unit transport motor section abnormality (FLM11)
The folding and transport operations of the folding unit are abnormal
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector.
Remedy:
Use SIM3-41 to check the operation of the folding unit transport motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor.
Code: F0-80
Description:
Finisher power cooling fan motor abnormality (FNFAN101)
The operation of the cooling fan in the power unit section of the finisher is abnormal.
Causes:
Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy:
Check connection from the control PWB to the fan motor. Replace the control PWB. Replace the fan motor.
Code: F0-81
Description:
Finisher upper tray fan abnormality (FNFAN103)
The operation of the cooling fan in the upper tray of the finisher is abnormal.
Causes:
Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy:
Use SIM3-3 to check the operation of the upper tray fan. Check connection from the control PWB to the fan motor. Replace the control PWB. Replace the fan motor.
Code: F0-82
Description:
Finisher lower tray fan abnormality (FNFAN104)
The operation of the cooling fan in the lower tray of the finisher is abnormal.
Causes:
Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy:
Use SIM3-3 to check the operation of the lower tray fan. Check connection from the control PWB to the fan motor. Replace the control PWB. Replace the fan motor.
Code: F0-83
Description:
Finisher paper guide motor section abnormality (FNM120)
The operation of the paper lead edge guide unit at the paper exit port of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the paper guide motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-84
Description:
Finisher grip section abnormality (FNM116)
The bundle grip operation when discharging paper bundle from the staple compiler of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the gripper motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-86
Description:
Finisher discharged paper hold motor section abnormality (FNM118)
The operation of the paper hold lever at the paper exit port of the finisher is abnormal.
Causes:
Motor lock, control PWB trouble, disconnection of harness or connector, hp sensor breakdown.
Remedy:
Use SIM3-3 to check the operation of the discharged paper hold motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.
Code: F0-90
Description:
Communication trouble between the stacker second series and the downstream units.
Communication trouble with a downstream unit
Causes:
Communication trouble with the stacker and the downstream unit of the stacker Stacker unit ID setting failure (Setting failure of the DIP switch on the control PWB), noises on the communication line, control PWB trouble, connector connection failure, harness breakage, disconnection of an AC cable to a downstream unit
Remedy:
Turn OFF/ON the power. Check connection between the stacker and the downstream unit of the stacker. Replace the control PWB of the downstream unit of the stacker.
热门图文