hp LaserJet Pro MFP M126nw常见故障代码描述,英文手册
更新时间:2024/3/31 1:48:25,view:66HP LaserJet Pro MFP M126nw打印机苏州横泾一体机维修服务中心电话0512-696l6769,苏州HP LaserJet Pro MFP M126nw横泾维修站,HP LaserJet Pro MFP M126nw横泾维修站, hp 1005w报错50, hp维护墨盒已满, hpm1005吃纸一张半, HP order-a-cartridge墨盒在哪, hp 2015dn 显示没墨,
Display:
22 Scanner Error
Description:
The product has experienced an internal hardware error.
Remedy:
1. Check all of the FFC connections. 2. Verify that the scanner-carriage can move along the track in the scanner assembly, and that the scanner motor can rotate. 3. If the error persists, replace the FFC cable. 4. If the error persists, replace the scanner motor or the scanner carriage. 5. If the error persists, replace the formatter.
Code: 50.X
Display:
50.X Fuser Error
Description:
The product has experienced an internal hardware error.
Remedy:
1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Turn on the power and wait for the product to initialize. 4. If the error persists, replace the fuser.
Code: 52
Display:
52 Scanner Error
Description:
The product has experienced a scanner error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on. If the error persists, replace the scanner assembly.
hpM126不开机 手机用户112.11.*.* 2021-8-11 E7
hpM126进纸卡纸 韩矢 2021-8-12 开机报错E7问题 维修分享经验
机器送来时 开机正常,一打印就全闪,拆机发现是陶瓷品烧坏,更换后 开机显示E7,之前在网上查到说是扫描头问题,换过后问题依旧,重新梳理思路
热门图文