hp LaserJet Color M551常见故障代码描述,英文手册1
更新时间：2022/7/24 3:42:08,view:116Code: -
Display:
Full Remove all paper from bin
Description:
The specified output bin is full.
Remedy:
Empty the bin to continue printing.
Code: -
Display:
lifting
Description:
The product is in the process of lifting paper in the indicated tray. X = 2 Tray 2 X = 3 Tray 3
Remedy:
No action necessary.
Code: -
Display:
[File System] device failure To clear, press OK
Description:
The specified device has failed.
Remedy:
Press the OK button to clear the error.
Code: -
Display:
[File System] file operation failed To clear, press OK
Description:
A PJL file system command attempted to perform an illogical operation.
Remedy:
Press the OK button to clear the error.
Code: -
Display:
[File System] file system is full To clear, press OK
Description:
A PJL file system command could not store something on the file system because the file system was full.
Remedy:
Press the OK button to clear the error.
Code: -
Display:
[File System] is not initialized
Description:
This file-storage component must be initialized before use.
Remedy:
Use the hp Embedded Web Server or hp Web Jetadmin to initialize the file system.
Code: -
Display:
[File System] is write protected
Description:
The file system device is protected and no new files can be written to it.
Remedy:
Press the OK button to clear the error.
Code: -
Display:
Accept bad signature
Description:
The product is performing a remote firmware upgrade, and the code signature is invalid.
Remedy:
Download the correct firmware upgrade file for this product, and then reinstall the upgrade. See the product user guide for more information.
Code: -
Display:
Bad optional tray connectioncted
Description:
The optional tray is not connected, not connected correctly, or a connection is not working correctly.
Remedy:
1. Turn the product off. 2. Remove and then reinstall the optional tray. 3. Reconnect connectors for the tray. 4. If the problem continues, replace the connector for the tray.
Code: -
Display:
Calibration reset pending
Description:
A calibration reset occurs when all jobs are processed.
Remedy:
To begin the reset sooner, cancel all jobs by pressing the Stop button
Code: -
Display:
Canceling
Description:
The product is canceling the current job.
Remedy:
No action is necessary.
Code: -
Display:
Canceling...
Description:
The product is canceling the current job.
Remedy:
No action is necessary.
Code: -
Display:
Checking engine
Description:
The product is conducting an internal test.
Remedy:
No action is necessary.
Code: -
Display:
Checking paper path
Description:
The product is checking for possible paper jams.
Remedy:
No action is necessary.
Code: -
Display:
Chosen personality not available To continue, press OK
Description:
A print job requested a product language (personality) that is not available for this product. The job will not print and will be cleared from memory.
Remedy:
Print the job by using a print driver for a different language, or add the requested language to the product (if possible). To see a list of available personalities, print a configuration page.
Code: -
Display:
Cleaning do not grab paper
Description:
The product is performing an automatic cleaning cycle. Printing will continue after the cleaning is complete.
Remedy:
No action is necessary.
Code: -
Display:
Cleaning...
Description:
The product is performing an automatic cleaning cycle. Printing will continue after the cleaning is complete.
Remedy:
No action is necessary.
Code: -
Display:
Clearing event log
Description:
This message is displayed while the event log is cleared. The product exits the menus when the event log has been cleared.
Remedy:
No action is necessary.
Code: -
Display:
Clearing paper path
Description:
The product is attempting to eject jammed paper.
Remedy:
Check progress at the bottom of the display.
Code: -
Display:
Close front door
Description:
The front door of the product is open.
Remedy:
Close the door. Use the switch test in the manual sensor test to verify that the front-door switch is properly functioning
Display:
Description:
The specified output bin is full.
Remedy:
Empty the bin to continue printing.
Code: -
Display:
Description:
The product is in the process of lifting paper in the indicated tray. X = 2 Tray 2 X = 3 Tray 3
Remedy:
No action necessary.
Code: -
Display:
[File System] device failure To clear, press OK
Description:
The specified device has failed.
Remedy:
Press the OK button to clear the error.
Code: -
Display:
[File System] file operation failed To clear, press OK
Description:
A PJL file system command attempted to perform an illogical operation.
Remedy:
Press the OK button to clear the error.
Code: -
Display:
[File System] file system is full To clear, press OK
Description:
A PJL file system command could not store something on the file system because the file system was full.
Remedy:
Press the OK button to clear the error.
Code: -
Display:
[File System] is not initialized
Description:
This file-storage component must be initialized before use.
Remedy:
Use the hp Embedded Web Server or hp Web Jetadmin to initialize the file system.
Code: -
Display:
[File System] is write protected
Description:
The file system device is protected and no new files can be written to it.
Remedy:
Press the OK button to clear the error.
Code: -
Display:
Accept bad signature
Description:
The product is performing a remote firmware upgrade, and the code signature is invalid.
Remedy:
Download the correct firmware upgrade file for this product, and then reinstall the upgrade. See the product user guide for more information.
Code: -
Display:
Bad optional tray connectioncted
Description:
The optional tray is not connected, not connected correctly, or a connection is not working correctly.
Remedy:
1. Turn the product off. 2. Remove and then reinstall the optional tray. 3. Reconnect connectors for the tray. 4. If the problem continues, replace the connector for the tray.
Code: -
Display:
Calibration reset pending
Description:
A calibration reset occurs when all jobs are processed.
Remedy:
To begin the reset sooner, cancel all jobs by pressing the Stop button
Code: -
Display:
Canceling
Description:
The product is canceling the current job.
Remedy:
No action is necessary.
Code: -
Display:
Canceling...
Description:
The product is canceling the current job
Remedy:
No action is necessary.
Code: -
Display:
Checking engine
Description:
The product is conducting an internal test.
Remedy:
No action is necessary.
Code: -
Display:
Checking paper path
Description:
The product is checking for possible paper jams.
Remedy:
No action is necessary.
Code: -
Display:
Chosen personality not available To continue, press OK
Description:
A print job requested a product language (personality) that is not available for this product. The job will not print and will be cleared from memory.
Remedy:
Print the job by using a print driver for a different language, or add the requested language to the product (if possible). To see a list of available personalities, print a configuration page.
Code: -
Display:
Cleaning do not grab paper
Description:
The product is performing an automatic cleaning cycle. Printing will continue after the cleaning is complete.
Remedy:
No action is necessary.
Code: -
Display:
Cleaning...
Description:
The product is performing an automatic cleaning cycle. Printing will continue after the cleaning is complete.
Remedy:
No action is necessary.
Code: -
Display:
Clearing event log
Description:
This message is displayed while the event log is cleared. The product exits the menus when the event log has been cleared.
Remedy:
No action is necessary.
Code: -
Display:
Clearing paper path
Description:
The product is attempting to eject jammed paper.
Remedy:
Check progress at the bottom of the display.
Code: -
Display:
Close front door
Description:
The front door of the product is open.
Remedy:
Close the door. Use the switch test in the manual sensor test to verify that the front-door switch is properly functioning