售后电话696l6769,> 维修资料 > hp > 苏州HP Color LaserJet 2840售后维修电话696l6769> 苏州hp打印机维修服务网

hp Color LaserJet 2840常见故障代码描述,英文手册

更新时间:2024/3/26 13:33:42,view:135

HP Color LaserJet 2840打印机苏州黄埭一体机维修点电话0512-696l6769,苏州HP Color LaserJet 2840黄埭维修站,HP Color LaserJet 2840黄埭维修站, hp5225 10.9531, HPm1136加粉亮黄灯, hp 2015dn 显示没墨, hp1020plus 打印一张纸后就卡住, HP M252DW卡纸,

Code: -
Display:
Engine error
Description:
The device has experienced an engine error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Code: -
Display:
Sensor error
Description:
The device has experienced an internal sensor error (most likely, the top-of-page sensor).
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If the error persists, check the top-of-page sensor. If the error persists, replace the DC controller.
Code: 50.x
Display:
50.x Fuser Error
Description:
The device has experienced an internal hardware error.
Remedy:
Turn off the device, and then disconnect the power cord. Remove the fuser, and then wait at least 20 minutes. Reinstall the fuser, turn on the device, and then wait for the device to initialize. CAUTION The parts on the internal surface of the fuser are very hot. To avoid burning yourself, do not touch those parts. Perform the heating-element check. If the error persists, replace the fuser assembly. See Replacing the fuser assembly. If, after replacing the fuser assembly, the error persists, replace the power supply.
Code: 51
Display:
51 Laser Error
Description:
The device has experienced an internal hardware error.
Remedy:
switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If the error persists, replace the laser/ scanner assembly.
Code: 52
Display:
52 Scanner Error
Description:
The device has experienced an internal hardware error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If the error persists, replace the scanning assembly.
Code: 54.2
Display:
54.2
Description:
The device has experienced an internal hardware error.
Carousel rotation error
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Replace the carousel drive motor. If the error persists, replace the DC controller. If the error still persists, inspect or replace the engaging detection flag.
Code: 55.1
Display:
55.1
Description:
The device has experienced an internal hardware error.
DC controller Memory Error
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Replace the DC controller
Code: 57
Display:
57 Fan Error Turn off then on
Description:
The device has experienced a problem with its internal fan.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If the error persists, replace the fan. If the error still persists, replace the DC controller.
Code: 59.16
Display:
59.16
Description:
The device has experienced an internal hardware error.
Main Motor rotation error
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Check the cable connections to the DC controller. If the error persists, replace the DC controller. If the error still persists, replace the main motor.
Code: 59.192
Display:
59.192
Description:
The device has experienced an internal hardware error.
Developer Motor rotation error
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Check the cable connections to the DC controller. If the error persists, replace the DC controller. If the error still persists, replace the developer motor.
Code: 59.4
Display:
59.4
Description:
The device has experienced an internal hardware error.
Fuser motor error
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Verify that the fuser is seated completely. If the error persists, replace the fuser motor. If the error still persists, replace the DC controller
Code: 59.99
Display:
59.99
Description:
The device has experienced an internal hardware error.
T2 Clutch error
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Check the cable connections to the DC controller. If the error persists, remove the imaging drum and check the clutch. If the error persists, replace the T2 clutch. If the error still persists, replace the DC controller
Code: 79
Display:
79 Error Turn off then on
Description:
The device has experienced an internal firmware error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If you have recently installed a memory DIMM in the device, turn off the device, remove the memory DIMM, reinstall the DIMM to verify that it is seated properly, and then turn on the device. If a surge protector is being used, remove it. Plug the device directly into the wall socket. Use the power switch to turn the device on. If the error persists, upgrade the firmware. If the error persists, replace the formatter.

热门图文

相关资料补充


热门关注
· hp color laserjet 3000常见故障代码描述,英文手册1

· hp color laserjet 3000常见故障代码描述,英文手册2

· hp color laserjet 3600常见故障代码描述,英文手册2

· hp color laserjet 3600常见故障代码描述,英文手册1

· hp color laserjet 3500常见故障代码描述,英文手册

· hp color laserjet 3550常见故障代码描述,英文手册

· hp color laserjet 3700常见故障代码描述,英文手册

· hp color laserjet 4500常见故障代码描述,英文手册

· hp color laserjet 4550常见故障代码描述,英文手册

· hp color laserjet 4610常见故障代码描述,英文手册

· hp color laserjet 4700常见故障代码描述,英文手册1

· hp color laserjet 4700常见故障代码描述,英文手册2

· hp color laserjet 4650常见故障代码描述,英文手册2

· hp color laserjet 4650常见故障代码描述,英文手册1

· hp color laserjet 3800常见故障代码描述,英文手册2

· hp color laserjet 3800常见故障代码描述,英文手册1

· hp color laserjet 4600常见故障代码描述,英文手册

· hp color laserjet 5500常见故障代码描述,英文手册

· hp color laserjet 5550常见故障代码描述,英文手册

· hp color laserjet 8500常见故障代码描述,英文手册1

· hp color laserjet 8500常见故障代码描述,英文手册2

· hp color laserjet 8550常见故障代码描述,英文手册2

· hp color laserjet 8550常见故障代码描述,英文手册1

· hp color laserjet 4730mfp常见故障代码描述,英文手册2

· hp color laserjet 4730mfp常见故障代码描述,英文手册1

· hp color laserjet 9500常见故障代码描述,英文手册2

· hp color laserjet 9500常见故障代码描述,英文手册1

· hp color laserjet cm2320常见故障代码描述,英文手册

· hp color laserjet cm1415常见故障代码描述,英文手册

· hp color laserjet cm1410常见故障代码描述,英文手册

推荐文章
· hpm1005开机无反应,如何判别是电源板还是主板的问题实拍图示说明.jpg

· hp2025颜色平面定位传感器错误

· hplaserjet9050dn错误代码49.2f83error

· hp2520hc电源灯闪并亮喊叹号

· hpm128fn加完粉后一直报黑色碳粉不足

· hpm202dw更换硒鼓出现不兼容的墨粉盒

· hpcp1025无法识别芯片

· hp128老提示更换硒鼓

· hp175a开机显示正在初始化后就显示通道卡纸

· hp1606dn提醒指示灯、就绪指示灯和“确定”指示灯亮起

· hpmfp175报49错误

· hplaserjetp1106就绪灯和错误灯同时亮

· hpn126打印机总是自动初始化

· hpm128fn双灯闪烁无显示

· hpm1136打印机激光器扫描架清理

· hpm1136mfp显示hp,然后下面两个灯一直在双闪,无法打印,什么情况

· hp5025错误代码59.20

· hp定影器错误关闭后然后打开

· hpm2727一直初始化

· hpcp5225恢复出厂设置

· hp177fw一体机新机提示安装成像鼓

· 佳能mf4452报警:e2020002接触式传感器hp错误,回路故障

· hp2055扫描打印复印一体机,显示printingdocument然后无反映故障

· hp1005纸刚出定影组件就卡住

· hp2055d开机提示52扫描仪错误

· hp128提示文档进纸器拾取错误

· hpm128fp故障灯一直闪控制面板无显示

· hp126nw提示正在使用用过的碳粉盒

· hpt790绘图仪错误代码79:03

· 79errorhp2600

· hp176开机时为什么电源灯旁的感叹号闪烁

· hpm1213nf打印一张通路卡纸

· hp1055cmip地址查询

· hp-mfpm176n加了粉还提示墨粉量低

· hp3630墨盒加墨水图解

· hp3035错误信息49.ff04

· hplaserjet1100serues显示感叹号

· hpm176一直提示三角感叹号错误是怎么回事

· hp1112开机灯闪烁

· hp系统错误7904关闭电源如果问题仍存在,请致电hp支持

· hpp2055d提示49err3d910c8怎么解决

· hpm1005复印薄的文稿有黑影

· hp226dw提示扫描仪错误17关闭然后打开

· hp1280电源灯不亮的真正原因

· hpp1606n不进纸,是什么问题

· hp2025彩色打印机报错59是哪里的问题

· ricohprintersc680

· hpm128fp开机一直显示正在初始化

· hp1319f屏幕 无显

· hp m1005一体机安装程序错误,rpc服务器不可用