苏州维修电话696l6769,> 维修资料 > hp > 苏州HP Color LaserJet 2820售后维修电话696l6769> 苏州hp打印机维修服务网

hp Color LaserJet 2820常见故障代码描述,英文手册

Code: -
Display:
Engine error
Description:
The device has experienced an engine error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Code: -
Display:
Sensor error
Description:
The device has experienced an internal sensor error (most likely, the top-of-page sensor).
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If the error persists, check the top-of-page sensor. If the error persists, replace the DC controller.
Code: 50.x
Display:
50.x Fuser Error
Description:
The device has experienced an internal hardware error.
Remedy:
Turn off the device, and then disconnect the power cord. Remove the fuser, and then wait at least 20 minutes. Reinstall the fuser, turn on the device, and then wait for the device to initialize. CAUTION The parts on the internal surface of the fuser are very hot. To avoid burning yourself, do not touch those parts. Perform the heating-element check. If the error persists, replace the fuser assembly. See Replacing the fuser assembly. If, after replacing the fuser assembly, the error persists, replace the power supply.
Code: 51
Display:
51 Laser Error
Description:
The device has experienced an internal hardware error.
Remedy:
switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If the error persists, replace the laser/ scanner assembly.
Code: 52
Display:
52 Scanner Error
Description:
The device has experienced an internal hardware error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If the error persists, replace the scanning assembly.
Code: 54.2
Display:
54.2
Description:
The device has experienced an internal hardware error.
Carousel rotation error
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Replace the carousel drive motor. If the error persists, replace the DC controller. If the error still persists, inspect or replace the engaging detection flag.
Code: 55.1
Display:
55.1
Description:
The device has experienced an internal hardware error.
DC controller Memory Error
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Replace the DC controller
Code: 57
Display:
57 Fan Error Turn off then on
Description:
The device has experienced a problem with its internal fan.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If the error persists, replace the fan. If the error still persists, replace the DC controlle
Code: 59.16
Display:
59.16
Description:
The device has experienced an internal hardware error.
Main Motor rotation error
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Check the cable connections to the DC controller. If the error persists, replace the DC controller. If the error still persists, replace the main motor.
Code: 59.192
Display:
59.192
Description:
The device has experienced an internal hardware error.
Developer Motor rotation error
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Check the cable connections to the DC controller. If the error persists, replace the DC controller. If the error still persists, replace the developer motor.
Code: 59.4
Display:
59.4
Description:
The device has experienced an internal hardware error.
Fuser motor error
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Verify that the fuser is seated completely. If the error persists, replace the fuser motor. If the error still persists, replace the DC controller
Code: 59.99
Display:
59.99
Description:
The device has experienced an internal hardware error.
T2 Clutch error
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Check the cable connections to the DC controller. If the error persists, remove the imaging drum and check the clutch. If the error persists, replace the T2 clutch. If the error still persists, replace the DC controller
Code: 79
Display:
79 Error Turn off then on
Description:
The device has experienced an internal firmware error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If you have recently installed a memory DIMM in the device, turn off the device, remove the memory DIMM, reinstall the DIMM to verify that it is seated properly, and then turn on the device. If a surge protector is being used, remove it. Plug the device directly into the wall socket. Use the power switch to turn the device on. If the error persists, upgrade the firmware. If the error persists, replace the formatter.

热门图文

相关资料补充


热门关注
· hp color laserjet 2830常见故障代码描述,英文手册

· hp color laserjet 2840常见故障代码描述,英文手册

· hp color laserjet 3000常见故障代码描述,英文手册1

· hp color laserjet 3000常见故障代码描述,英文手册2

· hp color laserjet 3600常见故障代码描述,英文手册2

· hp color laserjet 3600常见故障代码描述,英文手册1

· hp color laserjet 3500常见故障代码描述,英文手册

· hp color laserjet 3550常见故障代码描述,英文手册

· hp color laserjet 3700常见故障代码描述,英文手册

· hp color laserjet 4500常见故障代码描述,英文手册

· hp color laserjet 4550常见故障代码描述,英文手册

· hp color laserjet 4610常见故障代码描述,英文手册

· hp color laserjet 4700常见故障代码描述,英文手册1

· hp color laserjet 4700常见故障代码描述,英文手册2

· hp color laserjet 4650常见故障代码描述,英文手册2

· hp color laserjet 4650常见故障代码描述,英文手册1

· hp color laserjet 3800常见故障代码描述,英文手册2

· hp color laserjet 3800常见故障代码描述,英文手册1

· hp color laserjet 4600常见故障代码描述,英文手册

· hp color laserjet 5500常见故障代码描述,英文手册

· hp color laserjet 5550常见故障代码描述,英文手册

· hp color laserjet 8500常见故障代码描述,英文手册1

· hp color laserjet 8500常见故障代码描述,英文手册2

· hp color laserjet 8550常见故障代码描述,英文手册2

· hp color laserjet 8550常见故障代码描述,英文手册1

· hp color laserjet 4730mfp常见故障代码描述,英文手册2

· hp color laserjet 4730mfp常见故障代码描述,英文手册1

· hp color laserjet 9500常见故障代码描述,英文手册2

· hp color laserjet 9500常见故障代码描述,英文手册1

· hp color laserjet cm2320常见故障代码描述,英文手册

推荐文章
· hp226dw提示扫描仪错误17关闭然后打开

· hp1280电源灯不亮的真正原因

· hpp1606n不进纸,是什么问题

· hp2025彩色打印机报错59是哪里的问题

· ricohprintersc680

· hpm128fp开机一直显示正在初始化

· hp1319f屏幕 无显

· hp m1005一体机安装程序错误,rpc服务器不可用

· hp m1005 开机报scanner error 20错误,故障原因

· hp1020/hp1020plus/hp1010/hp1007定影器故障夹纸原因

· hp1008打印文稿纸中间有白道,字体模糊?

· hp1005经常夹纸,并且纸夹在定影器处

· hp1213收发不了传真问题

· hp1025彩色打印机加粉步骤

· hp5200打印白纸,无字问题原因

· hp1025机器偏色校准

· hp5200lx提示13.20.00顶盖卡纸,解决方案

· hp1536解除密码方法

· hp1536打印机打印靠右侧坚向全白,换硒鼓打印故障以旧

· hp designjet 500 ,800系列打印机 - 打印结束后不裁纸并报错 6105

· hp t610/t1100显示要更换裁刀的处理方法

· hp500绘图仪是打印时每隔10cm就出现一次重影

· hp designjet 500与800打印内容左右有重影

· hp designjet 500 和 800 系列打印机 - 系统错误 6105 processing job

· hp designjet 100和110系列绘图仪报错误代码0113 错误代码

· hp designjet系列绘图仪打印线条失真如何解决

· hp designjet系列绘图仪喷嘴堵塞如何解决

· hp designjet t610绘图仪报系统错误 7104

· hp500/800系列绘图仪常见故障2110

· hp dj2500报system error 020004 000000003,服务站坏

· hp2500报incorrect ink system 不正确的供墨系统

· hp p1007 打印表格很淡,如同白纸一样

· hp1005经常夹纸,并且纸夹在定影器处,经查看定影膜上粘了好多碳粉,并且有破损

· hp1213收发不了传真,一般有以下可能

· hp5200打印白纸

· hp1025机器校准偏色方法

· hp 1020打印机开机无反应绿灯亮

· hp喷墨打印机不进纸的解决方案

· hp5200印有时会出现打印一份出好几份的情况,有时会出现连续不停的打印

· hp3800打不出 国旗红的,红色没有?

· hp7000开机后,墨盒m灯闪

· hp1600机器打印红色这个样子,不红

· hp 5225开机提示turn off reinstall itb

· hp m1005 打印和复印都是是空白的故障啊?

· hp1136 电脑提示扫描仪故障,问题原因

· 佳能mx378 ,ip2780, hp2548,hp1518都能改连供吗

· hp7110机器电源灯一直在闪,怎么回事?

· hp128fn传真机老显示未检测到传真

· hp color l1aserjet cp1515n配置 ip 地址操作方法

· hp color laserjet cp1515n打印页面偏色解决方案