苏州sharp打印机维修服务网 > 维修资料 > sharp > 苏州Sharp FODC550售后技术支持 > 正文

Sharp FODC550常见故障代码描述,英文手册

更新时间:2026/10/28 1:37:50,view:162

苏州sharp550打印机售后服务中心客服热线69616769,苏州sharp打印机售后维修电话,sharp打印机售后网点,sharp550h4-01代码,打印机出分F2-02,L4-03,错误代码L4-03是什么意思,SharpAR-MU,复印机不规则的黑点,现F2-02代码,H3-00是什么问题,复印机F2-02,MX-MU错误代码H4-01,复印机现E7-02,AR打印机出现U2-22是什么错误,出出H5-1,提示H4-01,550维修视频2026/10/28

Code: 10
Description:
IMC trouble
An abnormality occurs in the IMC.
Causes:
USB chip error/CODEC error on the IMC.
Code: 10
Description:
Shading trouble (Black correction)
The CCD black scan level is abnormal when the shading.
Causes:
Improper connection of the CCD unit flat cable CCD unit abnormality MCU PWB abnormality
Code: 11
Description:
Shading trouble (White correction)
The CCD white scan level is abnormal when the shading.
Causes:
Improper connection of the CCD unit flat cable Dirt on the mirror, the lens, and the reference white plate Copy lamp lighting abnormality CCD unit abnormality MCU PWB abnormality (When occurred in the SPF scan position.) Improper installation of the mirror unit
Code: 11
Description:
Counter check sum error (EEPROM)
Check sum error of the counter area in the EEPROM
Causes:
EEPROM abnormality
Code: 13
Description:
IMC flash ROM error
An abnormality occurs in the IMC flash ROM.
Causes:
IMC abnormality
Code: 16
Description:
IMC DIMM memory read/write check error
An installation error occurs in the IMC memory module. An error occurs during access to the IMC memory.
Causes:
Improper installation of the IMC memory module. IMC memory module abnormality IMC memory contact abnormality IMC abnormality.
Code: 16
Description:
Abnormal laser output
When the laser output is stopped, HSYNC is detected.
Causes:
Laser abnormality MCU PWB abnormality.
Code: 81
Description:
IMC communication interface error (parity)
A parity error occurs in communication between the CPU and the IMC.
Causes:
IMC memory defect/data abnormality

Code: 84
Description:
IMC communication interface error (Framing)
A framing error occurs in communication between the CPU and the IMC.
Causes:
IMC memory defect/data abnormality.
Code: E1-00
Description:
IMC communication trouble
An abnormality occurs in communication between the CPU and the IMC.
Causes:
IMC - CPU signal line abnormality IMC Memory defect/data abnormality
Code: E1-82
Description:
IMC communication interface error (Overrun)
An overrun error occurs in communication between the CPU and the IMC.
Causes:
IMC memory defect/data abnormality.
Code: E7-02
Description:
LSU trouble
The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON)
Causes:
LSU connector or LSU harness defect or disconnection Polygon motor rotation abnormality Laser beams are not generated. MCU PWB abnormality.
Code: F5-02
Description:
Copy lamp lighting abnormality
The copy lamp does not turn on.
Causes:
Copy lamp abnormality Copy lamp harness abnormality CCD PWB harness abnormality.
Code: H2-00
Description:
Thermistor open
The thermistor is open. The fusing unit is not installed.
Causes:
Thermistor abnormality Control PWB abnormality Fusing section connector disconnection The fusing unit is not installed.
Code: H3-00
Description:
Heat roller high temperature detection
The fusing temperature exceeds 240°C.
Causes:
Thermistor abnormality Control PWB abnormality Fusing section connector disconnection.
Code: H4-00
Description:
Heat roller low temperature detection
The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C.
Causes:
Thermistor abnormality Heater lamp abnormality Thermostat abnormality Control PWB abnormality

Code: L1-00
Description:
Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked)
The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judgment of lock. When the difference in the levels of which and black is small, it is judged that the black mark could not be scanned by lock and the trouble code “L1” is displayed
Causes:
The scan head is locked by the lock switch. Mirror unit abnormality The scanner wire is disconnected. The origin detection sensor abnormality Mirror motor harness abnormality
Code: L3-00
Description:
Scanner return trouble
When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MhpS) does not turn ON. Or when the mirror base is returned for the specified time (about 6 sec) after start of copy return, the mirror home position sensor (MhpS) does not turn ON.
Causes:
Mirror unit abnormality Scanner wire disconnection Origin detection sensor abnormality Mirror motor harness abnormality
Code: L4-01
Description:
Main motor lock detection
When the main motor encoder pulse is not detected for 100 msec.
Causes:
Main motor unit abnormality Improper connection or disconnection the main motor and the harness. MCU PWB abnormality
Code: L6-10
Description:
Polygon motor lock detection
The lock signal (specified rpm signal) does not return within a certain time (about 20 sec) from starting the polygon motor rotation.
Causes:
Polygon motor unit abnormality Improper connection or disconnection of the polygon motor and the harness. MCU PWB abnormality
Code: U2-04
Description:
EEPROM read/write error (Serial communication error)
EEPROM access process error
Causes:
EEPROM abnormality
Code: U9-99
Description:
Operation panel language error
There is no language file. The language file is destroyed
Causes:
Language file abnormality MCU PWB abnormality

热门图文

相关资料补充_苏州sharp维修点售后电话_SharpFODC550维修手册_错误代码0512-69616769 更新日期2026/10/28 1:37:51,sharp,,,550

»夏普mx-m550n出现代码E7-02 123

»夏普550卡纸在排纸组件 125

»夏普AR550N复印机纸盒被卡住的原因 344

»夏普复印机mxm550n机子里面没有卡纸,但老是显示卡纸界面消不了是什么问题 121

»夏普AR550载体初始化方法 184

»夏普彩机5500N出代码L4-08 195

»夏普MX550复印机出现H4-01是哪个热敏电阻坏了? 1387

»夏普550代码f3-12 134

»夏普MXm550N下辊粘粉问题,上下辊都换新的 164

»夏普MX-M550N出现E7-90 98

»夏普550复印机出现纸盒架发生错误代码f3-12是怎么回事 361

»夏普MX550出现F2-02代码是什么原因 982

»夏普550怎样进入维修模式 271

»夏普MX-550提示H4-01 662

»Sharp MX3550N常见故障代码描述,英文手册4 137


sharp打印机SharpFODC550苏州胜浦sharp售后服务电话0512-696l6769,苏州sharpSharpFODC550售后电话,sharpSharpFODC550胜浦售后网点,sharpSharpFODC550维修手册,sharpSharpFODC550驱动程序下载,sharpSharpFODC550打印机售后维修点,sharpSharpFODC550厂家电话,故障代码在线技术交流,有问必答,sharpSharpFODC550卡纸,打印浅,亮红灯,不通电,无法使用等故障自己查询维修资料即可解决问题