佳能7095报代码e000065-0000
更新时间:2024/4/24 12:50:05,view:96佳能打印机7095苏州佳能打印机售后维修服务中心电话0512-696l6769,苏州佳能维修点电话, 佳能g2810故障代码E60, 佳能pm288打印机错误代码p03, 佳能2900打印出白纸然后显示缺纸, 佳能Mp288换了车架出现E02, 佳能 750 出现代码 03130031-2f26,
Description Error in detection of abnormal M charging AC current value
During the paper interval simple discharge current control, a current value that is higher than the target of
500[uA] is detected
Remedy Error in output of charging high voltage, Drum Unit error , environment control error
1. COPIER > DISPLAY > ANALOG; check if the TEMP value , the HUM value are matched with the environment temperature. When the values are dramatically mismatched (Lager than
15degrees Celsius)
2-1. Check the harness , connector between the DC Controller (UN09/ J206) , the Environment Sensor (UN45)
3-1. Replace the Environment Sensor (UN45)
4-1. Replace the DC Controller (UN9) When the values are matched
2-2. Check the state of the charging high voltage contact point
3-2. Replace the Drum Unit (M)
苏州佳能7095打印机售后维修服务中心电话0512-696l6769
热门图文