佳能C5255错误代码E000075—0103
更新时间：2025/4/16 6:47:47,view:496苏州佳能5255打印机售后服务中心客服热线69616769，苏州佳能打印机售后维修电话，佳能打印机售后网点， 佳能C5255错误代码E000020-0191, 打印机佳能C5255报错E00003-0002, 佳能c5255出现e000029-003错误代码, 佳能c5255和富士施乐2020, 佳能c5255故障代码e000075-0003,5255维修视频2025/4/16
Error Code E000075-0103
Open the cover that has the waste toner. Above the waste toner there is a grey cover with two screws. One by each magnet for the door. Loosen these two screws(one on left is above magnet, one on right is below) slide the cover to the right then out(the two screws I only loosen about 1/2 to a full turn)
There are two bubble gum connectors(pink plugs with blue wires going into two blue connectors) on the right side. Undo these by pinching the bottom of the bottom one, and top of the top one. I recommend doing them individually as to not break anything. Just below them(you probably have to bend down a little to see it) is a BUTTON HEAD screw. Remove it. Don't remove any screws with the red marking. On the left side there is another button head screw that you remove. Rotate the black lever 1/4 turn to the right until it clicks. The whole unit can then slide out. Be very careful with the belt. It is thin and crinkles easily. Also, don't touch it. At all.
The motor is on the left side, and is removed by removing 4 screws right around the motor.
佳能C5255错误代码E000075—0103
Open the cover that has the waste toner. Above the waste toner there is a grey cover with two screws. One by each magnet for the door. Loosen these two screws(one on left is above magnet, one on right is below) slide the cover to the right then out(the two screws I only loosen about 1/2 to a full turn)
There are two bubble gum connectors(pink plugs with blue wires going into two blue connectors) on the right side. Undo these by pinching the bottom of the bottom one, and top of the top one. I recommend doing them individually as to not break anything. Just below them(you probably have to bend down a little to see it) is a BUTTON HEAD screw. Remove it. Don't remove any screws with the red marking. On the left side there is another button head screw that you remove. Rotate the black lever 1/4 turn to the right until it clicks. The whole unit can then slide out. Be very careful with the belt. It is thin and crinkles easily. Also, don't touch it. At all.
The motor is on the left side, and is removed by removing 4 screws right around the motor.
佳能C5255错误代码E000075—0103
热门图文