东芝2000AC打印机出现CA00怎么解决
更新时间：2024/4/15 12:26:28,view:563东芝2000AC苏州东芝打印机售后维修服务中心电话0512-696l6769，苏州东芝维修点电话, 东芝打印机2000ac出现c390, 东芝3007故障代码ce90, 东芝复印机出保养维护0008, 东芝2303下粉量, 东芝2000ac转印带刮不干净,
苏州东芝打印机维修站电话696l6769，维修，服务
CA00] Color registration abnormality
Image formation Issue, Could be any Color , Drum , Developer or more.
When you check the printing status to find out that the color printing ratio is less than 5%, color toner
low density might be the cause.
Turn the code 08-2692 “Prevention of color toner low density / ON/OFF setting” to ON, and then set
number of sheets to be judged at the code 08-2693 “Prevention of color toner low density / Judged
number of sheets setting”.
If the color printing ratio is 5% or more, check the following.
1.Check if there is any abnormality on the hand grips and rods of the main charger cleaner. Correct if
there is.
2.Check if the drum is rotated properly by turning the coupling of the developer unit. Correct the auger
and the surrounding hardware if not.
3.Check if the connectors CN337, CN346 and CN358 of the LGC board are disconnected from the
laser optical unit or the harnesses are open circuited.
4.Check if there is any stain or scratch on the glass surface of the laser optical unit. Clean or correct if
there is.
5.Check if there is any stain on the image quality sensor and Image position aligning sensors.
6.Check if the sensor shutter is working properly.
* If the error still occurs, check the following.
< Invalidating color registration control >
(1)Turn the power ON while [0] and [8] are pressed simultaneously.
(2)Key in “4546”, then press the [START] button. (08-4546: Position adjustment control / Mode setting)
(3)Set the value to “0” (not performed automatically).
(4)Turn the power OFF.
东芝2000AC打印机出现CA00怎么解决,维修手册,技术资料
东芝2000AC进纸卡纸 手机用户116.54.*.* 2020-7-7 怎么解决
东芝2000AC不开机 吕郏霁 2020-7-8 原因分析
复印机在预热后校准图像时，显影辊表面覆盖的载体不足或没有载体，在传输过程中，吸附碳粉量过少，从而影响显影效果，复印机检测到异常，显示报错CA00，也就是图像套色校正异常。
解决方案
检查显影辊上的载体量。
东芝2000ac打印浅 手机用户42.234.*.* 2020-7-24 想买FC一2000AC电路主板
东芝2000acusb无法识别 手机用户42.234.*.* 2020-7-24 想买FC一2000AC电路主板
东芝2000ac进纸卡纸 蒋聘门 2020-7-27 淘宝看看，或只能维修站购买
东芝2000AC错误提示 手机用户113.12.*.* 2020-10-24 东芝打印机打印的时候出现紫色一条道怎么回事
东芝2000AC错误提示 手机用户113.12.*.* 2020-10-24 东芝打印机打印的时候出现紫色一条道怎么回事
东芝2000AC打印脏 尤豫 2020-10-24 红色鼓出问题了。更换 可以打印单色调判断哪个鼓出问题了
技术 曲陌灵风 发表于 2022/3/24 ca00换黑色载体就行了
CA00] Color registration abnormality
Image formation Issue, Could be any Color , Drum , Developer or more.
When you check the printing status to find out that the color printing ratio is less than 5%, color toner
low density might be the cause.
Turn the code 08-2692 “Prevention of color toner low density / ON/OFF setting” to ON, and then set
number of sheets to be judged at the code 08-2693 “Prevention of color toner low density / Judged
number of sheets setting”.
If the color printing ratio is 5% or more, check the following.
1.Check if there is any abnormality on the hand grips and rods of the main charger cleaner. Correct if
there is.
2.Check if the drum is rotated properly by turning the coupling of the developer unit. Correct the auger
and the surrounding hardware if not.
3.Check if the connectors CN337, CN346 and CN358 of the LGC board are disconnected from the
laser optical unit or the harnesses are open circuited.
4.Check if there is any stain or scratch on the glass surface of the laser optical unit. Clean or correct if
there is.
5.Check if there is any stain on the image quality sensor and Image position aligning sensors.
6.Check if the sensor shutter is working properly.
* If the error still occurs, check the following.
< Invalidating color registration control >
(1)Turn the power ON while [0] and [8] are pressed simultaneously.
(2)Key in “4546”, then press the [START] button. (08-4546: Position adjustment control / Mode setting)
(3)Set the value to “0” (not performed automatically).
(4)Turn the power OFF.
东芝2000AC打印机出现CA00怎么解决,维修手册,技术资料
复印机在预热后校准图像时，显影辊表面覆盖的载体不足或没有载体，在传输过程中，吸附碳粉量过少，从而影响显影效果，复印机检测到异常，显示报错CA00，也就是图像套色校正异常。
解决方案
检查显影辊上的载体量。
苏州东芝2000打印机维修服务中心电话0512-696l6769
热门图文