施乐C75代码093-315怎么复位
更新时间:2024/4/26 7:10:47,view:388施乐打印机C75苏州施乐打印机售后维修服务中心电话0512-696l6769,苏州施乐维修点电话, 施乐m158b打印机显示093-933, 施乐出093-406, 施乐m228b打印机显示AF无法打印, 施乐2020报061-371, 施乐打印出来彩色斑点,
BSD-ON:9.15 Toner Dispense Control (1 Of 3) BSD, CH9.16
Magenta Dispense failure.
Procedure
Enter the Diagnostics. Enter DC330 [093-007] (Magenta Dispense Motor). Start. Dispense
Motor is heard rotating. (ON duration is 2 sec.)
Y N
Open the PWB Chassis. (REP2.1.1) 24VDC is measured between P/J430-8 () on
the IOT PWB , GND (-).
Y N
Refer to BSD CH2.2, check the 24VDC circuit to P/J430-6 on the IOT PWB.
Turn off the power. Disconnect Connectors P/J201M on the Dispense Motor. Measure
the wire-wound resistance of the Dispense Motor. The resistance between P/J201M-1
, -2 pins is between 22.0 , 27.0 ohms.
Y N
Replace the Magenta Dispense Motor (PL6.4).
Check the following for continuity:
IOT PWB P/J436-A12 to Dispense Motor P/J201M-1
IOT PWB P/J436-A11 to Dispense Motor P/J201M-2
Every resistance is 1 ohm , less.
苏州施乐打印机报修电话696l6769,维修,售后服务
施乐C75进纸卡纸 富士施乐彩机DC700 2020-9-28 代码093-315
施乐C75不开机 许兆绥 2020-9-28 093-315 762-313→0 M 粉仓马达可能损坏
热门图文