施乐s2011显示004345原因
更新时间：2024/4/16 8:11:19,view:402施乐打印机s2011苏州施乐打印机售后维修服务中心电话0512-696l6769，苏州施乐维修点电话, 施乐7500代码042-326, 施乐3124硒鼓怎样加碳粉, 富士施乐2265 043-343, 施乐4112错误代码077-313, 施乐p355定影不上纸,
苏州施乐打印机维修站电话696l6769，现场解决，售后维修电话696l6769
施乐s2011显示004345原因 大哥们是什么问题呢，给点指导啥谢谢 苏州004345 HVPS Communication Error参考 BSD CH9.1ESS/MCU PWB 与 HVPS 之间出现通讯不良。原因 / 处理1. 关闭后再打开电源。2. 关闭电源， 检查 HVPS J500 到 ESS/MCU PWB J402 之间电线的断线、 短路或接触不良。3. 检查后若无问题， 则依序更换下列零件。· HVPS (PL18.1)· ESS/MCU PWB (PL18.1)意思是高压板或主板吧
施乐2011打印重影 davexue 2021/11/27 苏州施乐2011售后维修服务中心地址查询 004-345MCU/HVPS Communication Fail.SOLUTION:
1.Check 5 VDC from P/J 574-5 to P/J 574- 4 on the HVPS Control PWB
2.Disconnect P/J 574.Is there 5 VDC from J 574-5 to J 574-4
3.Check the wire from J411-5 to J574-5 for a short circuit to ground
4.Switch off the power,check these wires for an open, short circuit to ground for the following:
5.HVPS Control PWB P/J574-9 to MCU PWB P/J411-1
6.HVPS Control PWB P/J574-8 to MCU PWB P/J411-2
7.HVPS Control PWB P/J574-7 to MCU PWB P/J411-3
8.HVPS Control PWB P/J574-6 to MCU PWB P/J411-4
9.Check for open circuit, loose connections in the 5 VDC supply wires between P/J411, pins 5,6;,P/J574, pins 5,4.
10.If this does not resolve the problem, replace the HVPS Control PWB & Engine control Board
施乐s2011显示004345原因 大哥们是什么问题呢，给点指导啥谢谢 苏州004345 HVPS Communication Error参考 BSD CH9.1ESS/MCU PWB 与 HVPS 之间出现通讯不良。原因 / 处理1. 关闭后再打开电源。2. 关闭电源， 检查 HVPS J500 到 ESS/MCU PWB J402 之间电线的断线、 短路或接触不良。3. 检查后若无问题， 则依序更换下列零件。· HVPS (PL18.1)· ESS/MCU PWB (PL18.1)意思是高压板或主板吧
施乐2011打印重影 davexue 2021/11/27 苏州施乐2011售后维修服务中心地址查询 004-345MCU/HVPS Communication Fail.SOLUTION:1.Check 5 VDC from P/J 574-5 to P/J 574- 4 on the HVPS Control PWB
2.Disconnect P/J 574.Is there 5 VDC from J 574-5 to J 574-4
3.Check the wire from J411-5 to J574-5 for a short circuit to ground
4.Switch off the power,check these wires for an open, short circuit to ground for the following:
5.HVPS Control PWB P/J574-9 to MCU PWB P/J411-1
6.HVPS Control PWB P/J574-8 to MCU PWB P/J411-2
7.HVPS Control PWB P/J574-7 to MCU PWB P/J411-3
8.HVPS Control PWB P/J574-6 to MCU PWB P/J411-4
9.Check for open circuit, loose connections in the 5 VDC supply wires between P/J411, pins 5,6;,P/J574, pins 5,4.
10.If this does not resolve the problem, replace the HVPS Control PWB & Engine control Board
热门图文