京瓷1800开机提示维修呼叫C2010
更新时间:2024/4/5 6:13:46,view:247京瓷打印机1800苏州京瓷甪直一体机维修点电话0512-696l6769,苏州京瓷1800甪直维修站,京瓷1800甪直维修站, 京瓷M5021非原装墨粉, 京瓷2201废墨仓在哪, 京瓷打印机报E-001, 京瓷报7301, 京瓷fs1020mfp更换墨盒依然显示墨粉用尽,
· C2010主电机启动错误。。。
· 京瓷的机器维修呼叫C2010
Code C2010
DescriptionMain drive motor starting error No FG (Frequency generation) pulse is entered within the predetermined period since ASIC (U8) on the engine controller PCB has issued a motor activation signal to the main drive motor.
Causes
Defective engine controller PCB. Defective main drive motor. Excessive torque for driving drum unit or primary transfer unit. (Overloaded by a damaged gear.) Defective harness between engine controller PCB and main drive motor, or poor contact of the connector terminals.
Remedy
Replace the engine controller PCB and check for correct operation. Replace the main drive motor. Check if the drum unit or primary transfer unit rotates smoothly. Check for broken gears. Replace if any. Check the continuity of the harness and the insertion of connectors.
热门图文