美能达1060/2060/3070报错代码C-3105,C3105解决方法
更新时间:2024/4/14 7:55:59,view:97美能达打印机苏州美能达打印机售后维修服务中心电话0512-696l6769,苏州美能达维修点电话, 美能达3000MF出现关闭ADF盖, 美能达387清计数器, 科尼卡美能达206打印机出现C3851, 美能达226新机复印有彩条, 美能达363不能使用第二纸盒。,
美能达1060/2060/3070报错代码C-3105,C3105解决方法
Cause
Error in fuser swing arm function
Resolution
First thing to do is to restart machine by powering off main switch leaving for a minute to sit and restart. Machine reinitialisation may clear this error and you can work away
If a machine reboot does not stop error from reoccurring, restart machine in service mode
(Open the foot door, power off the main switch, hold down the "Utility/Counter" key on the keypad, power on and keep holding the key until the machine boots up in service mode, close the front door)
Then
Select Option 3 , (System Setting )
Select Option 1 , (Software DIPSW )
using arrows change the left most number to 36
using arrows change middle number to 1
select the right most setting to OFF
Exit out of this section and keep exiting/closing out of service mode and machine will restart and warm up again. 苏州美能达打印机维修站电话696l6769,企业一站式服务,,耗材配送
Cause
Error in fuser swing arm function
Resolution
First thing to do is to restart machine by powering off main switch leaving for a minute to sit and restart. Machine reinitialisation may clear this error and you can work away
If a machine reboot does not stop error from reoccurring, restart machine in service mode
(Open the foot door, power off the main switch, hold down the "Utility/Counter" key on the keypad, power on and keep holding the key until the machine boots up in service mode, close the front door)
Then
Select Option 3 , (System Setting )
Select Option 1 , (Software DIPSW )
using arrows change the left most number to 36
using arrows change middle number to 1
select the right most setting to OFF
Exit out of this section and keep exiting/closing out of service mode and machine will restart and warm up again. 苏州美能达打印机维修站电话696l6769,企业一站式服务,,耗材配送
热门图文