苏州美能达打印机维修服务网> 维修资料 > 美能达 > 苏州美能达6000/7000售后维修电话696l6769 > 正文

美能达6000/7000报错代码C-4661,C4661解决方法

更新时间:2026/11/21 14:09:33,view:469

苏州美能达打印机售后服务中心客服热线69616769,苏州美能达打印机售后维修电话,美能达打印机售后网点,美能达维修视频2026/11/21

美能达6000/7000报错代码C-4661,C4661解决方法
Cause
Colour regustration sensor (C-4661 - Yellow, C-4662 Magenta, C-4663 - Cyan, C-4664 Black)
Resolution
Step 1.
Clean the eyes
Step 1.
1 open the front door 〔l〕 of the main body.
Loosen the screws(2](2 pieces.
2Open the toner hopper unit door1]
3Pull up the right lever f1l and left lever 2]
frontward,and then pul out the process unit 13].
Important Hold the center of the lever when operatngt|t。
this is the section to clean
sce close up to the right the 3 sensors are behind shutters that need to be lifted up to clean the sensor Color registration sensor shutter/FrColor registration sensor shutter/Rr PGC sensor shutter
Step 2.
Power the machine OFF from the main switch leaving the sub switch ON.
Turn main power switch ON while pressing the Utility/Counter key. Keep holding it till the comes up in Service mode.
-02 process adjustment
-02 drum peculiarity
-06 toner revert all on
-02 gamma automatic adjust (wait for adjustment to complete)
Step 3.
-01 Machine Adjustment
-01 Printer Adjustment
-10 Colour Registration Adjustment (wait for adjustment to complete)
When completed exit out of service mode. 苏州美能达打印机维修站电话696l6769,企业一站式服务,上门维修,耗材配送

热门图文

相关资料补充更新日期2026/11/21 14:09:46,美能达,,,

»柯尼卡美能达185e进入维修模式后tcrgain显示0正常吗 57

»彩色复印机美能达C450开机出现C-3201如何处理 58

»柯尼卡美能达1580mf清零 97

»柯美252出现C5354后整套板换下也没办解决 53

»柯尼卡美能达 183 报错 77

»柯美C224e彩机打印全白,报P5|P6|P7|P8|P9|P21|P25|P27等代码维修思路 53

»打印机机器故障维修召唤C3451 92

»夏普2648网络打印机设置 265

»美能达501TCR调整数字多下粉大还是数字小下粉大 102

»柯美C221出现E301 128

»美能达283提示故障代码C4501 281

»柯美1050e报错23-26 73

»柯美C6500报6101代码 87

»柯美b363被人改了维修模式ce密码需要如何清除 284

»美能达c221出错误代码8104,开机之后所有齿轮风扇都没动作 227


美能达打印机苏州胥口美能达售后服务电话0512-696l6769,苏州美能达售后电话,美能达胥口售后网点,美能达维修手册,美能达驱动程序下载,美能达打印机售后维修点,美能达厂家电话,故障代码在线技术交流,有问必答,美能达卡纸,打印浅,亮红灯,不通电,无法使用等故障自己查询维修资料即可解决问题


热门关注