美能达750错误代码3803
更新时间:2026/11/13 12:49:15,view:125苏州美能达750打印机售后服务中心客服热线69616769,苏州美能达打印机售后维修电话,美能达打印机售后网点,美能达750代码C-3401,柯尼卡复印出很多黑道,复印有折痕好像定影有异物,复印机出现C2401,开机充电架灯不亮故障代码C-2401,开机没多久就自动重启,柯尼卡高速机有人用过巴川粉吗,出现C-2401,老是预热关机打开又可以了什么情况,出现代码2703,如何调下粉量25开机,出现2401,扫描时出现工作执行不当,柯尼卡复印黑道,复印机清零,750维修视频2026/9/22
苏州美能达750售后维修电话696l6769,维修
C3803 ERROR problem with the fusing unit. This is the assembly that gets hot and "fuses" the toner onto your paper. This error code means that the fusing unit did not warm up properly. You will need to have a service company come out to diagnose and repair the problem then reset this code as service mode entry is required in order to reset. It could be as simple as cleaning the thermistor, replacing the thermistor, thermal fuse etc. I would estimate the cost at around $200.00.
Here is the section from the service manual that deals with this code:
Thermistor /1 (TH1) detects a low
temperature when a specified
period of time elapses after the
fusing heater lamp is turned ON
for the fusing ON control.美能达750错误代码3803
C3803 ERROR problem with the fusing unit. This is the assembly that gets hot and "fuses" the toner onto your paper. This error code means that the fusing unit did not warm up properly. You will need to have a service company come out to diagnose and repair the problem then reset this code as service mode entry is required in order to reset. It could be as simple as cleaning the thermistor, replacing the thermistor, thermal fuse etc. I would estimate the cost at around $200.00.
Here is the section from the service manual that deals with this code:
Thermistor /1 (TH1) detects a low
temperature when a specified
period of time elapses after the
fusing heater lamp is turned ON
for the fusing ON control.美能达750错误代码3803
热门图文